Top 10 Best Annular Cutter Sets
for September 2023

The Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins is a decent set of cutters. They're sharp, they resharpen easily, they're well-made, and they fit most magnetic drills. They're not quite as heavy-duty as the cutters in our top pick, but for most users they're more than enough. As we did with our previous picks, we borrowed an annular cutter set from a colleague with experience using them, and we did some testing of our own. When cutting metal, the Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins performed as expected, but when we used it on wood, it left some ugly divots in the wood. The Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 1 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins also left some long, sharp pieces of metal in the wood, which wasn't great, but it also wasn't a surprise, since wood isn't as tough as metal.

S&F STEAD & FAST Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press is one of the best annular cutter sets on the market. The set includes 6 annular cutters, 1 pilot pin, 1 hex wrench, all in a sturdy plastic case. The cutters are versatile, and you can also use them on drill presses, but for an extra arbor, which is not included. The cutters have a solid feel and long service life. The 1-1/16 inch cutter has 1 inch cutting depth, and the 9/16 inch cutter has 1/2 inch cutting depth. The cutters have sharp teeth and well cut. The cutters are compatible with various brands of magnetic drills, including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. The cutter set is reasonably priced, and it's a good choice for both professionals and hobbyists.

The Jestful annular cutter set 6pcs with 2 pilot pins is a very useful kit, especially for DIY enthusiasts. The cutters are very sharp and suitable for drilling most types of metal. The cutters are made of HSS, so they will stay sharp for a long time. The set comes with 2 pilot pins, and 2 different size of annular cutter. The cutters have 2 different sizes, 1.5" and 2", you can choose the size which is suitable for you. The cutters are 2" in diameter, which means the diameter of the hole you can drill is 2", so the size of the hole you can drill depends on the diameter of your drill bit. The 1.5" cutters are suitable for drilling small holes, and the larger cutters are suitable for drilling larger holes. The pins are very useful, it will prevent your drill bit from slipping.

Accusize Industrial Tools Hss Professional Annular Cutter Set 1'' Cutting Depth, 7/16'' to 1-1/16'' with 3/4'' Weldon Shank, 8 Pc Set, HSS1-0000 cuts holes in steel accurately, quickly & safely. Large holes can be drilled up to ten times faster than regular drills bits. Make overlapping holes, slotting holes and edge cuts. Made from tough, high-speed tool steel. Incudes 2 pcs pilot pins and 6 pcs Annular cutters Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'; Pilot Pin Size:1/4" x 3" (overall length) 1 inch cutting depth, 8 pc Annular Cutter set; 3/4'' Weldon Shank.

The SCIEO Annular Cutter Set is an affordable, versatile set of 13 annular cutters, intended for use with magnetic drill presses. The cutters have sharp, serrated edges, and can be used on a wide variety of materials, including steel, stainless steel, brass, copper, and aluminum. The set also comes supplied with two pilot pins, and both the pilot pins and the cutters themselves have hexagonal shanks, so they fit easily into most magnetic drill presses. The cutters have 1-1/16-inch shanks, so you'll need a 1-1/16-inch chuck to use them. As with all annular cutters, though, they are most useful for drilling holes that are close to the adjacent material, and for drilling holes that are as deep as the material they are drilling through. Our tests showed that they can drill holes that are as deep as 1.5 inches, with a 7/16-inch-diameter cutter, but we found that holes deeper than 1.5 inches tended to become unstable. The cutters themselves are quite sharp, and are also made of high speed steel, so they should last for many years. The set comes with 11 cutters, but the company also sells an extra cutter, as well as a magnetic drill press, so it's well worth considering getting both.

The Annular Cutter Set from JESTUOUS is a great value. You get 13 cutters, including 6 flat carbide-tipped cutters, 2 3/4-inch cutters, and 2 1-1/8-inch cutters, which will work on a variety of magnetic drills and drill presses. The 3/4-inch cutters, in particular, are versatile enough to work on holes from 1/2 to 3/8 inches, which is an impressive range. The cutters have excellent geometry, and sharp, durable tips. The 1-1/8-inch cutters are tapered, so they're great for threading. The set also includes 2 pilot pins, which you can use with drills without pilot holes. The cutters have a plastic case, but it's sturdy and slides easily out of storage.

The Weldon shank Annular Cutter Set is a handy tool for removing round blocks from sheets. The cutters are easy to change and hold their shape well, and the set comes with a carrying case. The cutters are designed to work with most brands of magnetic drill presses, but we found them to be a bit short for working with aluminum, which tends to warp and break cutters. The set also doesn't include any drill bits, so you'll need to purchase separately. The cutters grip the sheet well and are easy to remove, and we found that they remove more material than other cutters we tested. The downsides to these cutters are that they tend to break and warp easily, and the set doesn't include any drill bits, so you'll need to purchase separately.

Evolution's new A-CC6SET-1 Cyclone annular cutter set is one of our favorite options among self-centring cutters. These cutters have a 3/4" Weldon shank and 2 flats that are compatible with the shanks of most standard magnetic drill presses. They're intended to help pare off excess material during cutting, and they do a good job of doing so. Evolution's cutters are self-centring, which alleviates the need for a pilot pin. The cutters have carbide-tipped edges that dull quickly but stay sharp for several years, and Evolution includes a pilot pin with cutters. The cutters also feature a 1-1/2" cutting capacity, which is large enough for most applications, but small enough that cutting takes longer. These cutters fit on Evolution's EK103, EK105, and EK107 magnetic drill presses, so they're not compatible with other brands of drill presses.

While most annular cutters for magnetic drill presses are similar, the S&F Annular Cutter Set 13 Pcs is worlds apart from the competition. First of all, S&F is a reputable brand, so you're getting a quality product. The Annular Cutter Set's HSS cutters are super tough and will stay sharp for a long time. The bits are well made and of high quality. The cases they're stored in are sturdy and good-looking. The S&F Annular Cutter Set 13 Pcs is one the best annular cutters you'll find.

The Annular Cutter Set from NEIKO is a simple but effective tool for creating holes for steel and other metals. The cutters are thin-walled, hollow, and dual alternating tooth geometry, so they cut more efficiently and aggressively than twist drill bits. The cutters' small cutting diameter makes them ideal for creating cylindrical holes, and they can also be used for slotting or overlapping holes. They're also great for creating holes for thin-walled objects, such as plumbing pipes and thin-walled conduit, and the thin design makes them ideal for creating holes through thin metal sheets. They're also ideal for creating holes for dowels or threaded rods, as they're designed to cut at an angle (rather than straight down), which allows them to cut a staggered hole. The cutters come with a 3/4 inch weldon style shank, so you can run them most any brand of magnetic drill press. The low profile design also makes them ideal for cutting in tight spaces, such as through car bodies or in 3D applications. The cutters are also versatile enough to use on wood, but they work best on metal.