Eilumduo 2Pcs 5/8 inch (16mm) Hole Carbide Cutter for Metal
Premium Material: Hole Cutter made of high quality Carbide Alloy materail teeth, reduce the damage of tips, increase the endurance, provide a longer service life.
The Elumduo hole cutter is a fast, easy-to-use tool for cutting holes in metal, iron, and other hard materials. It cuts clean, burr-free holes faster than conventional twist drills or hole saws, and its spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws. The cutter body also cuts very clean holes, and it's easy to remove the burrs after cutting. The hole saw is powerful enough to drill through 5/8-inch (16mm) metal. The cutter body is tightly sealed, so it's easy to clean after cutting. The cutter's high speed makes it suitable for use on up to 5/8-inch (16mm) metal, including stainless steel and cast iron. The Elumduo hole cutter has a 4mm hex shank, so most drills with 4mm hex shanks (such as DeWalt's 1/2-inch drill) can drill with it. The Elumduo hole cutter is backed by a 1-year warranty.
EZARC Carbide Hole for Cutter Thick Metal
Safe & Durable Design EZARC metal plate hole saw cutter uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable and heat resistant.
The EZARC carbide hole cutter makes quick work of cutting through thick metal, stainless steel, iron pipes, high alloy steel, and sheet metal plate. It features a chip groove and deploying hole design, which effectively remove chips and increase operating speed. The hole cutter also has a replaceable pilot drill bit, which is convenient to use. Its pilot drill bit, which is 1-inch in diameter, can cut through 1-inch-thick metal easily. The hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate. The holes made by this hole cutter are very smooth, with no burrs, and this hole cutter is very durable and can last for years.
Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Saw Hole for Cutting Stainless Steel Plate
Ideal DesignSplit tip pilot drill prevents damage by gradually guiding cutter to material.
The Rannb 38mm/1.5 Inch Hole Saw kit is an affordable, compact hole saw kit that is perfect for anyone who needs to drill several holes at once. The heavy-duty saw cuts through a wide variety of materials, including metal, plastic, and brick, and the kit includes a 1/4-inch hex driver and an L wrench for tightening and loosening the saw. The saw comes with a pilot drill bit, which is essential when doing deep or multiple holes, and which is not included in the standard kit. The saw also has a 25mm depth, which is perfect for drilling into tile, brick, and other nonferrous materials. The saw's 38mm cutting diameter is the ideal size for most tile saws. The kit comes with a 20-year warranty, which is the longest warranty period of any hole saw we've tested.
LionMount 1 inch Deep Cut Carbide Hole Cutter for Thick Metal Deep Cut Hole for Saw Stainless Steel Metal Pipes and Hard Material 1 1/4 in 32 mm
Effortless Operation LionMount hole cutter was designed a chip groove and a deploying hole, which can effectively remove chips and increase the operating speed. Replaceable pilot drill bit are available.
The LionMount 1 inch Deep Cut Carbide Hole Cutter is ideal for cutting through thick metals like stainless steel, iron pipes, high alloy steel, and metal sheets. The hole saw is very durable, thanks to the variable teeth technology, which can balance the cutting and making it more durable and heat resistant. The hole saw can precisely cut smooth holes due to the excellent control of the concentricity rate. The hole saw is very easy to use, and can be controlled perfectly. This hole saw is ideal for DIY projects and household use, and can be used for a variety of home decoration and industrial applications. This hole saw is more cost-effective than other metal hole cutters.
Rocaris HSS Hole Kits Saw for Metal
Size of these 15pcs hole saw: 15mm/0.59", 16mm/0.63", 18mm/0.71", 20mm/0.79",21mm/0.83", 22mm/0.87", 25mm/0.98", 26mm/1.02", 28mm/1.10", 30mm/1.81", 35mm/1.38", 40mm/1.57", 45mm/1.77", 50mm/1.97", 53mm/2.09".
HSS Hole Saw Kits for Metal, Rocaris 15 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 15~53mm are every bit as good as their price would suggest. The kit comes with 15 bits, all of which are made of high-quality HSS, and they come in sizes ranging from 15 to 53 mm. The kit also includes a 90-degree aluminum handle, which makes it easier to control the hole saw while drilling. The bits themselves are very sharp, and they also have anti-cutting teeth, so they're ideal for drilling in thin materials, such as metal. The 90-degree handle also makes it easier to drill straight holes, unlike the other kits we tested, which tended to wander a bit. The kit is a good deal for the price, but it's a bit on the bulky side, so it might not be ideal for smaller hands.
uxcell 90mm Carbide Hole Cutter
General Purpose: Can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals. Suitable for round or square pipes, equipment cabinet
The uxcell 90mm Carbide Hole Cutter, TCT Hole Saws for Stainless Steel Sheet Metal, with Limit Step is an extraordinarily precise tool for cutting precise holes in, say, steel sheet, sheet metal, stainless steel sheet, aluminum sheet, iron sheet, copper sheet, tin plate, etc. It works well on handheld drills, bench drills, magnetic drills, pneumatic drills and other rotating machines. The carbide tip is sharp and has a long service life. The cutting capacity is 90mm x 3.54mm, the shank size is 10mm x 0.39mm, the cutting depth is 30mm x 1.18mm, and the total length is 100mm x 4mm. The holes are accurate, and the depth of the hole is adjustable. The teeth are sharp, and the teeth will not deform when drilling. The holes are not deep, and the drill bit has a long life. The carbide hole cutter is suitable for metal drilling. The uxcell 90mm Carbide Hole Cutter, TCT Hole Saws for Stainless Steel Sheet Metal, with Limit Step is a practical tool for cutting precise holes.
Rocaris HSS Hole Kits Saw for Metal
Size of these 14pcs hole saw: 16mm/0.63", 18mm/0.71", 20mm/0.79", 25mm/0.98", 26mm/1.02", 28mm/1.10", 30mm/1.81", 35mm/1.38", 40mm/1.57", 45mm/1.77", 50mm/1.97", 53mm/2.09".
This is a well-made kit for hobbyists, students, and DIYers who want to drill precise holes in metal and wood. The six core bits have sturdy, sharp teeth that cut clean, smooth holes. The handle is slim and fits comfortably in the user's hand. The drill bits are interchangeable, so users can drill holes of different sizes and depths. The HSS gears in the drill bits are durable and do not slip or bind during drilling. The metal case that holds the drill bits is sturdy and feels solid. The kit comes with six drill bits, a wrench, a hex key, and a small metal case. The kit comes with six drill bits, a wrench, a hex key, and a small metal case.
ASNOMY 6PCs Large Size Drill Hole Bit Saw Set 22-65mm
High precision and Easy to Use: Tungsten Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine
The ASNOMY 6PCs Large Size Drill Bit Hole Saw Set 22-65mm has a decent selection of bits, but they're not the best quality. They're made of cemented carbide, so they're hard enough to cut through metal and plastic, but they're not as hard as some competitors' bits, and they tend to chip easily. They're also not terribly sharp, which limits the bits' cutting power. Some of the bits also don't include quick-change hex chucks, which makes them more difficult to use. The bits come individually cased, which is nice, and the bits fit holes up to 65mm in diameter, so they're good for cutting through plates and other large items. The bits are oil-treated, which helps prevent rust, and they're conveniently stored in a handy storage case, which is just as well, because the bits tend to scratch easily.
REETAI-FOUR 10Pcs TCT Hole Saw Kit
High Quality MaterialThis hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications.
This hole saw set is versatile, and it comes with a generous assortment of sizes. The saws are sharp and clean, and it's easy to feed the saws into steel, aluminum, or wood. They cut through thick metal easily, and the pilot drill bits make for easy starting. The set comes with a selection of hex keys, so you can get a snug fit for your pilot holes. The saws are a bit unwieldy, though, so it's best to use an electric drill with a stand or to clamp the saws into a vise. The saws come with a lubrication pen, but it's best to apply a few drops of lubricant before you start cutting. This is a decent kit, but it's no substitute for a rotary tool.
Tungsten Carbide Hole Saw T.C.T Carbide Heavy Duty Kkmoss Grade Industrial Stainless Steel Hole Cutter，Suitable for Steel Plate
T.C.T material: T.C.T cutting machine is the standard for electrical construction, transportation and general metal manufacturing. The spring on the pilot bit ejects the chips, which is simple and has impact resistance and wear resistance
The T.C.T carbide hole saw cuts through metal faster than traditional twist drills. It cuts cleanly and smoothly, and ejects the chips with the push of a button. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time. The carbide tip milling cutter can cut steel, iron, aluminum, copper, cast iron, and most importantly, it can cut stainless steel and other hard alloys. It can be used in many occasions and meets the needs of most people.