10 Best Camera Cage with Tops for January 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.6
SCORE
SmallRig Cage Kit for Blackmagic Design BMPCC 4K & 6K Camera, with Camera Cage Top Handle SSD Mount Holder for Samsung SSD T5 - KCVB2748
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

SmallRig Cage Kit for Blackmagic Design BMPCC 4K & 6K Camera, with Camera Cage Top Handle SSD Mount Holder for Samsung SSD T5

KCVB2748

by SmallRig
What We like

HIGH CUSTOMIZATIONSpecifically designed for BMPCC 4K & 6K camera, the cage kit comes with a cage, a top thread handle and a SSD T5 Mount. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

more infoarrow_drop_down

Product Features

  • TOP HANDLEThis SMALLRIG top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.
  • SSD MOUNTThis SSD mount offers flexible positioning on your cage using the included 1/4"-20 screws. It securely clamps both the T5 SSD and the connected USB Type-C cable via locking levers. The mount's offset design helps avoid interference with an attached top handle, side handle, or other accessories.
  • PERFECT PROTECTIONSecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching
  • MUTIPLE MOUTINGSOne shoe mount, several NATO rails, and multiple 1/4"-20, 3/8"-16, and ARRI-style accessory threads are built into the cage's top and sides for accessories such as monitor, microphone, led flash, etc.

Perfect protectionsecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. rubber pads on the bottom protect your camera body from scratching Mutiple moutingsone shoe mount, several nato rails, and multiple 1/4"-20, 3/8"-16, and arri-style accessory threads are built into the cage's top and sides for accessories such as monitor, microphone, led flash, etc. Ssd mountthis ssd mount offers flexible positioning on your cage using the included 1/4"-20 screws. it securely clamps both the t5 ssd and the connected usb type-c cable via locking levers. the mount's offset design helps avoid interference with an attached top handle, side handle, or other accessories. Top handlethis SmallRig top handle equipped with built-in shoe mount for microphone and led lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.

2
9.6
SCORE
SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage - HTN2362
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage

HTN2362

by SMALLRIG
What We like

QR NATO HANDLESmallRig Nato Handle grip is designed to provide a comfortable handheld use for accessory such as monitor, microphone, light and magic arm. It is compatible with SmallRig Camera Cage such as SmallRig2203, SmallRig2254, SmallRig1889

more infoarrow_drop_down

Product Features

  • BUILT-IN SPANNERThe top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use
  • ROTATING 360 AND ANTI-OFF DESIGNThe quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. The twist handle is equipped with two cold shoes. One of them in front features an anti-off button to protect your setup from slipping off
  • COMFORTABLE GRIPSmallRig HTN2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen
  • ACCESSORY THREADSThe handle features multiple 1/4"-20 and arri 3/8"-16 threaded holes for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135

Built-in spannerthe top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. you can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. so that makes it very easy to use for balancing the camera for handheld use Accessory threadsthe handle features multiple 1/4"-20 and arri 3/8"-16 threaded holes for accessory attachment, such as SMALLRIG monitor mount bse2294, bse2346 and ballhead 1135 Rotating 360 and anti-off designthe quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. the twist handle is equipped with two cold shoes. one of them in front features an anti-off button to protect your setup from slipping off Comfortable gripSMALLRIG htn2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen

3
9.5
SCORE
CAMVATE DSLR Camera with Cage Top Handle Wood Grip for 600D 70D 80D
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

CAMVATE DSLR Camera with Cage Top Handle Wood Grip for 600D 70D 80D

by CAMVATE
What We like

We provide two rod on the package,one is 125mm,the other is 145mm, the 125mm side pipe is compatible with Canon650D,600D,550D,500D,450D,760D,750D,700D,100D,1200D; Nikon D3200,D3300,D5200,D5500; Sony a58,a7,a711; Panasonnic GH4/GH3/GH2;the 145mm is compatible with Canon80D, 60D,70D,50D,40D,30D,6D,7D,7D Mark11,5D Mark11,5D Mark111,5DS,5DSR; Nikon D7000,D7100,D7200,D300S,D610,DF; Sony A99

more infoarrow_drop_down

Product Features

  • Wooden handgrip (right hand)
  • Have one cold shoe on the top handgrip
  • Have standard 1/4"-20 & 3/8"-16 screw hole on the cage for DIY accessories
  • Camera Cage for 70D 80D

Camera cage for 70d 80d Have standard 1/4"-20 & 3/8"-16 screw hole on the cage for diy accessories Have one cold shoe on the top handgrip Wooden handgrip (right hand)

4
9.4
SCORE
MAGICRIG Camera Cage with Top Handle Grip for Sony A7RIII /A7III /A7SII /A7M3 Camera to Quick Release Extension Kit
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

MAGICRIG Camera Cage with Top Handle Grip for Sony A7RIII /A7III /A7SII /A7M3 Camera to Quick Release Extension Kit

by Smpuvte
What We like

HDMI cable clamp can be secured on left side of cage, Provides the protection of HDMI Port, not make a damage of Cable Plug. Reserved Camera Port, Battery Charger Port, Battery Port, Pop-Up Flash, MI Hot Shoe. Right strap port, allows to mount strap.ctly into the body.It allows to mount HDMI Cable Clamp to protect HDMI port. Right strap port, allows to mount strap.This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.

more infoarrow_drop_down

Product Features

  • The Top of the cage features 2 cold shoes, 3/8'' and arrays of 1/4'' threads. Two lens adapter ports fits Lens Adapter Support to better sustain the weight of heavy lenses.Magic arm, flash light, EVF mount, handle, microphones can be installed on top of the cage.
  • Double locking - It is equipped with a threaded hole that matches the eyelet eyelet and secures the screw to the eyelet to prevent the camera from deflecting and accidentally falling during shooting.
  • Protective DSLR camera cage kit for Sony A7RIII /A7III /A7RII /A7II /A7SII /A7M3. It allows enables shooting at multi-angles and can be handheld easily.
  • It allows to mount HDMI Cable Clamp to protect HDMI port. Right strap port, allows to mount strap.This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.

Double locking - it is equipped with a threaded hole that matches the eyelet eyelet and secures the screw to the eyelet to prevent the camera from deflecting and accidentally falling during shooting. The top of the cage features 2 cold shoes, 3/8'' and arrays of 1/4'' threads. two lens adapter ports fits lens adapter support to better sustain the weight of heavy lenses.magic arm, flash light, evf mount, handle, microphones can be installed on top of the cage. It allows to mount hdmi cable clamp to protect hdmi port. right strap port, allows to mount strap.this cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera. Protective dslr camera cage kit for sony a7riii /a7iii /a7rii /a7ii /a7sii /a7m3. it allows enables shooting at multi-angles and can be handheld easily.

5
8.9
SCORE
SMALLRIG NATO Top Handle Grip for Camera Cage Cheese Handle with 70mm NATO Rail Cold Shoe - 2003
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

SMALLRIG NATO Top Handle Grip for Camera Cage Cheese Handle with 70mm NATO Rail Cold Shoe

2003

by SMALLRIG
What We like

BUIT-IN COLD SHOE: The handle comes with built-in cold shoe which could attach to the microphone mount for microphone.

more infoarrow_drop_down

Product Features

  • BALANCE ADJUST: You could easily slide the handle onto Safety NATO Rail and tighten down the thumbscrew. You can slide it left or right on the Rail to keep the camera balance.
  • EASY ASSEMBLY AND DISASSEMBLY: Fisrt, you can mount the Nato Rail on the cage / plate. Then you mount the Nato handle on the Nato Rail. And you do not take of the Nato Rail from the cage. It is very easy to assemble and disassemble the handle.
  • MOUNTING POINTS:Arrays of 1/4" -20 and 3/8"-16 mounting holes on the handle for mounting additional accessories, such as rod clamp, magic arm, etc.
  • UNIVERSALITY: The handle grip 2003 was locked on the camera cage or top plate via two 1/4" screws. It works with all kinds of cameras.

Balance adjust: you could easily slide the handle onto safety nato rail and tighten down the thumbscrew. you can slide it left or right on the rail to keep the camera balance. Universality: the handle grip 2003 was locked on the camera cage or top plate via two 1/4" screws. it works with all kinds of cameras. Mounting points:arrays of 1/4" -20 and 3/8"-16 mounting holes on the handle for mounting additional accessories, such as rod clamp, magic arm, etc. Easy assembly and disassembly: fisrt, you can mount the nato rail on the cage / plate. then you mount the nato handle on the nato rail. and you do not take of the nato rail from the cage. it is very easy to assemble and disassemble the handle.

6
8.7
SCORE
NICEYRIG Camera Top Handle Handgrip with 15mm Rod Clamp Cold Shoe Mounts for DSLR Cameras/Camcorder/Action Cameras Cages
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

NICEYRIG Camera Top Handle Handgrip with 15mm Rod Clamp Cold Shoe Mounts for DSLR Cameras/Camcorder/Action Cameras Cages

by NICEYRIG
What We like

Made of rosewood and black aluminum alloy. Durable, lightweight and comfortable.

more infoarrow_drop_down

Product Features

  • The wooden top handle is equipped with three built-in cold shoe mounts at both end for attaching on camera lights, microphone shock mounts, etc. There are 1/4 3/8 threaded holes and ARRI location hole for additional accessories attachment.
  • The wooden top handle could be mounted on the cage with 1/4 threaded holes. It enables handheld shooting experience.
  • The 15mm rod clamp allows for attachment of EVF mount or microphone shock mount and so on.

The wooden top handle is equipped with three built-in cold shoe mounts at both end for attaching on camera lights, microphone shock mounts, etc. there are 1/4 3/8 threaded holes and arri location hole for additional accessories attachment. The wooden top handle could be mounted on the cage with 1/4 threaded holes. it enables handheld shooting experience. The 15mm rod clamp allows for attachment of evf mount or microphone shock mount and so on.

7
7.8
SCORE
UURig Camera Cage Top Handle Grip with NATO Rail 15mm Rod Hole Slide Chute Handle Compatible for Sony A6500 A6400 A6000 A7 III A7M3 Canon Nikon Panasonic Camera DSLR Video Shooting Accessories - R042
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

UURig Camera Cage Top Handle Grip with NATO Rail 15mm Rod Hole Slide Chute Handle Compatible for Sony A6500 A6400 A6000 A7 III A7M3 Canon Nikon Panasonic Camera DSLR Video Shooting Accessories

R042

by UURig
What We like

Versatile Extend Design Comfortable Grip --- The lengthened design concept makes the grip more comfortable. Nice attachment for more accessories.

more infoarrow_drop_down

Product Features

  • Lightweight & 4 Cold Shoes --- 4 Cold shoes and a variety of 1/4" 3/8" Arri locating hole expansion screw to attach more accessories. Used Weight reduction design, about only the weight of four eggs.
  • Super Fast Loading & Unloading --- NATO Rail Chute Design quickness disassembled, Super load bearing can be fearless of any scene.
  • Built-in Magnetic Hex Wrench --- Built-in hex wrench can be disassembled at any time(Hex wrench compatible with all UURig Products including top handle, cage or other mount clamp etc.)
  • Could be widely used on camera cage, suitable for Sony A6400 A6300 A73 A7M3 Canon Nikon Fujifilm Panasonic Lumix GH5 BMPCC 4K 6K etc Camera Cage.

Could be widely used on camera cage, suitable for sony a6400 a6300 a73 a7m3 canon nikon fujifilm panasonic lumix gh5 bmpcc 4k 6k etc camera cage. Built-in magnetic hex wrench --- built-in hex wrench can be disassembled at any time(hex wrench compatible with all UURig products including top handle, cage or other mount clamp etc.) Super fast loading & unloading --- nato rail chute design quickness disassembled, super load bearing can be fearless of any scene. Lightweight & 4 cold shoes --- 4 cold shoes and a variety of 1/4" 3/8" arri locating hole expansion screw to attach more accessories. used weight reduction design, about only the weight of four eggs.

8
7.8
SCORE
SMALLRIG Top Handle Grip with Locating Point for Arri, Adjustable Camera Handle with Mounting Points, Shoe Mount for Video Camera Cages, LED Lights Microphones- 1984
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

SMALLRIG Top Handle Grip with Locating Point for Arri

Adjustable Camera Handle with Mounting Points, Shoe Mount for Video Camera Cages, LED Lights Microphones- 1984

by SMALLRIG
What We like

EXQUISITE DESIGNThe SMALLRIG versatile handle is made by aluminium alloy, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig. Also, we specially offer a 1/4 spanner for free access. It is quite convenient when you need to adjust the handle forwards and backwards for camera and rigs balance.

more infoarrow_drop_down

Product Features

  • MOUNTING POINTSThe SMALLRIG camera handle with abundance of 1/4 and 3/8'' mounting points and two accessory mount for ARRI standard for rosette adapter for ARRI standard, can attach different SMALLRIG rigs on it for additional attachment options and DIY operations.Shoe mounts are found on front and at the back for attaching on cameras lights and microphones, monitor mounts, EVF mounts.
  • TOP HANDLEThis SMALLRIG top handle equipped with two built-in shoe mounts for microphone, LED lights, is designed for handheld shooting, compatibility with small-sized mirrorless cameras: for Sony A7/A7r/A7s/A7II/A7RII/A7SII, A6000/A6300/A6500, for Panasonic G7, GH4, GH5, G85, for Fujifilm X-T2, etc.
  • MATERIALAluminum Alloy
  • COMPATIBLITYThis SMALLRIG camera handle grip can bolts on to two 1/4''-20 holes spaced 36mm apart center for secure camera carrying, Also, the SMALLRIG camera handle fits any cage with the standard 1/4-20 thread on top, such as SMALLRIG cage 2087, cage 2049, cage 1982, cage 1889 or any other cages of SMALLRIG.

Materialaluminum alloy Top handlethis SMALLRIG top handle equipped with two built-in shoe mounts for microphone, led lights, is designed for handheld shooting, compatibility with small-sized mirrorless cameras: for sony a7/a7r/a7s/a7ii/a7rii/a7sii, a6000/a6300/a6500, for panasonic g7, gh4, gh5, g85, for fujifilm x-t2, etc. Compatiblitythis SMALLRIG camera handle grip can bolts on to two 1/4''-20 holes spaced 36mm apart center for secure camera carrying, also, the SMALLRIG camera handle fits any cage with the standard 1/4-20 thread on top, such as SMALLRIG cage 2087, cage 2049, cage 1982, cage 1889 or any other cages of SMALLRIG. Mounting pointsthe SMALLRIG camera handle with abundance of 1/4 and 3/8'' mounting points and two accessory mount for arri standard for rosette adapter for arri standard, can attach different SMALLRIG rigs on it for additional attachment options and diy operations.shoe mounts are found on front and at the back for attaching on cameras lights and microphones, monitor mounts, evf mounts.

9
7.8
SCORE
Movo SCG-30 Aluminum Alloy DSLR Camera Cage with Top Handle Grip - Camera Holder with Shoe Mount and 15mm Rod for DLSR Cameras
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Movo SCG-30 Aluminum Alloy DSLR Camera Cage with Top Handle Grip

Camera Holder with Shoe Mount and 15mm Rod for DLSR Cameras

by Movo
What We like

PORTABLE: The components are easy to disassemble and the 15mm rods are removable for easy and convenient transport from one shoot to the next

more infoarrow_drop_down

Product Features

  • MOUNTING OPTIONS: Mount various accessories to fit your filming needs with the multiple 1/4", 3/8" threads, and shoe mount. Also mounts on a tripod
  • DURABILITY: Crafted from heavy-duty aluminum, feel confident and secure carrying up to 22lbs of gear
  • COMPATIBILITY: Holds a variety of cameras like the Canon 5D mark II III 700D 650D Nikon D7200, Pentax, Sony, Olympus, Panasonic, and more

Mounting options: mount various accessories to fit your filming needs with the multiple 1/4", 3/8" threads, and shoe mount. also mounts on a tripod Durability: crafted from heavy-duty aluminum, feel confident and secure carrying up to 22lbs of gear Compatibility: holds a variety of cameras like the canon 5d mark ii iii 700d 650d nikon d7200, pentax, sony, olympus, panasonic, and more

10
7.7
SCORE
CAMVATE Basic Camera Cage Rig with Top Handle Universal Use
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

CAMVATE Basic Camera Cage Rig with Top Handle Universal Use

by CAMVATE
What We like

Basic and simple design, its very practical and lightweight

more infoarrow_drop_down

Product Features

  • Array of 1/4"-20 and 3/8"-16 mounting points on the cage rig for attaching accessories
  • Its made of high quality aluminum alloy, CNC-milled
  • This basic cage is universally compatible with most cameras less than 124mm in height

Its made of high quality aluminum alloy, cnc-milled Array of 1/4"-20 and 3/8"-16 mounting points on the cage rig for attaching accessories This basic cage is universally compatible with most cameras less than 124mm in height

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details