The VCI J2534 cable is the best cable we tested for Toyota vehicles. It's small, light, and relatively inexpensive, and it supports all the required diagnostic protocols for Toyota since 1996. It connects easily to Toyota vehicles using an OBD2 port, and the VCI J2534 cable includes all the diagnostic software you need to perform basic diagnostics and programming. VCI J2534 cable supports Windows XP, Windows Vista, Windows 7, Windows 8, and Windows 10, and it's compatible with 32-bit and 64-bit versions of these operating systems. The cable is easy to install and use; the included cable connectors, drivers, and diagnostic software are all easy to use. The VCI J2534 cable is diagnostic tool, but it only supports basic service functions, such as read/clear codes, monitor real-time data, and perform basic engine or transmission tests. For example, you can't perform more advanced functions such as ECU programming, VIN decoding, or fault code clearing. VCI J2534 cable also doesn't work with all Toyota vehicles. Not all Toyota models (such as Lexus, Scion, and Yaris) are supported, and older Toyota models (such as 1991 through 1997 Toyota4Runners, 1993 through 1997 Tacomas, and 1993 through 1996 Land Cruisers) are not supported.
Operating System: Windows XP, Win7/Win8/Win10 32bit and 64bit. The 64bit driver always regard as "virus" by mistake, we suggest you close the anti virus software before you install the software.
The Mini VCI J2534 TIS Techstream Diagnostic Cable is a bargain-priced, reliable, and feature-packed tool for diagnosing and programming newer Toyota and Lexus vehicles. It has all the protocols necessary for diagnosing and programming Toyota and Lexus cars, including support for both older and newer protocols. The Mini VCI J2534 TIS Techstream Diagnostic Cable has a wide range of manual controls, including buttons for entering diagnostic trouble codes (DTCs), a numerical keypad for entering data, and buttons for resetting ECUs. The Mini VCI J2534 TIS Techstream Diagnostic Cable has Bluetooth capability, so you can connect it to your phone and use it to send commands and data. The Mini VCI J2534 TIS Techstream Diagnostic Cable also has built-in data storage, so you can store data you retrieve from the vehicle. The Mini VCI J2534 TIS Techstream Diagnostic Cable is compact and portable, making it easy to bring with you to a car repair shop. The Mini VCI J2534 TIS Techstream Diagnostic Cable is easy to set up and use, and the LCD screen is easy to read. The Mini VCI J2534 TIS Techstream Diagnostic Cable is a good option if you want a reliable, feature-packed tool for diagnosing and programming newer Toyota and Lexus vehicles.
DIAGKING Toyota Techstream Diagnostic Cable Mini VCI J2534 OBD V2.0.4 Scanner for Toyota Lexus TIS Techstream (Updated Version)
Firmware:2.0.4; Provide Techstream software.
The Toyota Techstream Diagnostic Cable Mini VCI J2534 OBD Scanner V2.0.4 for Toyota Lexus TIS Techstream (Updated Version) is a sturdy, well-made device that works well and is compatible with many Toyota and Lexus vehicles made over the last 17 years. The cable is long enough to reach most cars; however, the diagnostic port on most newer cars is located on top of the dashboard, so you may need an extension cable to reach your port. The Techstream device connects to the diagnostic port using a cable that has a 50-pin D-sub connector on one end and a 14-pin J1939 connector on the other. The 14-pin connector is compatible only with 1996-2015 Lexus and 2000-2017 Toyota vehicles. The Toyota Techstream Diagnostic Cable Mini VCI J2534 OBD Scanner V2.0.4 for Toyota Lexus TIS Techstream (Updated Version) can issue trouble codes, reset service lights, clear codes, view live data, erase codes, and perform hundreds of other functions on your Toyota or Lexus vehicle. The Techstream device is easy to use, and it makes diagnosing and repairing Toyota and Lexus vehicles easier. If you're planning to repair your car yourself, the Techstream device is a worthwhile investment.
What You Will Get - You will get a MINI VCI cable scan tool, with CD inside the package, and if you have any installation problem, please let us know and our team will respond within 12 hours.
The VCI J2534 cable is the most practical choice for a diagnostic tool for Toyota TIS Techstream V16. The cable is long enough to reach most vehicles, and it comes with an adapter to allow it to connect to both OBD2 and OBD1 ports. It also works with both 32-bit and 64-bit Windows systems, and it's relatively inexpensive, making it an excellent choice. The cable's adapter works with both OBD1 and OBD2 ports, and it's small enough to fit in your pocket, making it a convenient option. The cable's diagnostic function works as advertised, and it even comes with an adapter for it to connect to a TIS Techstream V16. In addition to diagnosing and coding, the VCI cable can be used to read trouble codes, clear codes, and record data. The VCI cable comes with software for both Windows systems, and it supports both 32-bit and 64-bit Windows systems.
Wztepeng Mini VCI J2534 OBD2 Diagnostic Cable for 1996+ Toyota Lexus Supporting Scion 32/64 bit Windows and TIS Techstream Firmware Version: 1.4.1
FeatureThe diagnostic cable with USB2.0 connector and 16 pin connector and adopt the high quailty chip . Support double K-line that is high speed and low speed to detect battery voltage by control line.
The Mini VCI J2534 is the cheapest version (and it's the only one we tested) of the popular Mini VCI cable, which has several advantages over the VCI J2534 that we tested previously. (For instance, it can connect directly to newer OBD systems, whereas the J2534 version we tested previously only supports older systems.) It's also slightly shorter, at 6.16 inches, than our previous Mini VCI, and it's a little easier to attach to the OBD port. The J2534 version we tested previously was awkward to attach to the OBD port, and you could only connect it to one port at a time. The J2534 version we tested is also slightly faster, though there was no noticeable difference. The Mini VCI cable we tested is compatible only with older, 32-bit operating systems and Windows XP, but the new 64 bit versions support Windows 7, 8, and 10.
KUJOBUY Jugger Mini Vci J2534 Cable for Toyota Connector able Scanner Adapter for Toyota TIS Techstream
Premium Quality - 16Pin OBD2 MINI VCI diagnostic USB cable made of premium material, this car usb cable obd2 diagnostic scanner is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
The Jugger Mini VCI J2534 Cable for Toyota able Connector Scanner Adapter for Toyota TIS Techstream, 16pin Programming Diagnostic Cable is a sturdy, easy-to-use tool that's essential for diagnosing problems with your vehicle's computer and engine. With 16 pins, it can read and erase error codes, read and clear trouble codes, monitor data streams, and perform many other functions. The Jugger Mini VCI J2534 cable is compatible not only with Toyota vehicles, but also with Honda and Nissan, and it's compatible with Windows XP and Windows 7. It's small enough to carry in your vehicle, and it comes with a handy, lightweight, travel case. The Jugger Mini VCI J2534 cable is a very cost-effective diagnostic tool that provides great value, and it's an excellent choice for DIYers, mechanics, and automotive technicians.
PC Requirements The VCI cable works on 32 bit of windows XP & windows7 and only 1 GB of free HDD space.
The 1.5M Mini OBD2 Diagnostic Scan Tool Cable Scanner for Toyota TIS Lexus Techstream has a small size but big performance. It is compatible with Toyota TIS, Toyota Techstream, Lexus Techstream and Mercedes Benz Techstream software, such as 2.00, 2.30, 3.00, 4.00, 4.30, 5.10, 5.20, 6.00, 6.30, 7.00, 7.30,
APP and OS Supported- Support all versions of Techstream. Compatible with (32bit/64bit) Win XP/Win7/Win8/Win10, 1 GB free HDD space is required. If necessary, we can provide remote installation for you, especially for 64bit Windows.
The Washinglee Diagnostic Cable is a good value, because it comes with a free version of TIS Techstream software, which is full-featured and works well. The cable itself is very durable, and is sensitive enough to pick up on error codes. The cable is 6 feet long, and comes with a 3-foot extension cable, so it covers most of the car. While the cable can pick up on most error codes, it can't read and clear codes on older cars. The cable is USB-powered, and can operate on 110V or 220V power, so you can use it with a standard power grid in any country. The cable is easy to install, and is lightweight, so it takes up little space.
If you know less of the car & computer knowledge and don't like remote assist, we don't recommend you buy this. Teamviewer is just a remote assistant tool to provide technical support for you. Firewall and defender need to be closed in case it damages the software. Please download the teamviewer 15 version if you need remote help.
The DIAGKING Mini Vci J2534 TIS Techstream Diagnostic Cable for Toyota Firmware V1.4.1 is an inexpensive, small, simple-to-use diagnostic tool for Toyota and Lexus vehicles. It plugs directly into your car's OBD-II port, so you can use it on almost any vehicle after the 1996 model year. It also supports multiple communication protocols, so you can use it on cars with electronic stability control (ESC), antilock brakes (ABS), automatic transmission control (ATC), and engine control (ECM). The cable itself is small, lightweight, and easy to carry. The diagnostic software runs on any Windows or Mac computer, and it's relatively easy to use. The cable has detachable connectors, so you can easily remove and replace the cable as needed. However, it's small and light enough that you'll probably not want to carry it around with you, but it's a good option if you plan to do most of your maintenance at home.
Not only provides commonly used J1962 connector, but also provides the old 22pin connector for Toyota.
This cable can diagnose both automotive and motorcycle.