10 Best Electrical Work Gloves
for September 2023

These gloves are a great choice for linemen, electricians, plumbers, and HVAC workers. The gloves are insulated, so they provide protection from electrical shocks. The gloves are also heat resistant, so you can use them when working with hot objects. The gloves are thin and comfortable to wear. The gloves are also very protective, so they provide great protection against cuts and punctures. The gloves are also comfortable in the hand, so they don't cause hand fatigue. The gloves are also easy to use. The gloves are durable, so they'll last a long time.

The Magid Safety M011B8 gloves were comfortable to use, made our fingers feel nice and nimble, and were fairly durable. Thanks to their 11-inch length, these gloves were long enough to fit most linemen's hands, and we liked that they came equipped with a straight cuff and rolled edge, so they worked well with lineman's gloves and hats. The palm and back of the gloves were lined with a layer of rubber that was clearly labeled, and we liked that the gloves were cut-resistant. Unfortunately, they were a little bit on the warm side and tended to get sweaty after about 20 minutes of wear, so they might be more comfortable for warmer climates or for users who wear them for shorter periods of time. We also liked the gloves' silicone coating, which made them easier to grip. These gloves were fairly expensive, but, for electricians who work in dangerous environments, they're well worth the investment.

These gloves are a cheap and effective solution for anyone who's dealing with high-voltage equipment, particularly in areas where the chances of being electrocuted are high. They are cheap enough that it's worth considering getting a few pairs, especially since they're so easy to clean. The gloves' electrical insulation rating is 12KV, which is enough protection for most high-voltage work. The gloves' construction is solid, and they tend to wear well over time. The only complaint we have is that the gloves fit a bit small, so if you're between sizes, get the larger one. The gloves are also slightly on the thick side, so you'll probably need to wear a thicker work glove underneath.Overall, these gloves are strong enough and flexible enough to handle most high-voltage work, and they should be more than enough protection for most people.

The gloves are comfortable to wear, and I was able to work with them for several hours at a time without experiencing any discomfort. The gloves are also extremely lightweight, so they're easy to put on and take off, and they don't add much weight to my overall tool bag. The gloves are form-fitting, so my hands didn't feel constrained or restricted, and the openings were wide enough for me to easily pull my hands in and out. The gloves are designed to protect my hands from voltage, but I worried they might be too bulky for daily use, so I took them out for a test drive, and they worked great. The gloves were comfortable enough to wear under normal work gloves, and they worked great when I was working around the house or cleaning. The gloves were my first choice for day-to-day use, but if I had to choose only one pair, I probably wouldn't buy them again because they were a bit expensive ($25) and I didn't find them as durable as some of the other options we tested.

The Maxiflex Ultimate Nitrile Grip Work Gloves (34-874) are an excellent choice for light-duty applications, including general construction and repair work. We found that these gloves performed best for tasks that required precision, such as handling small tools and fixing small dents. The gloves were light and flexible enough to handle most tasks, but the grip didn't hold up to heavy use, such as holding heavy weights or doing heavy construction work. The gloves are machine washable, but they only dry in about 30 minutes, so it's recommended to dry them quickly. The gloves are ambidextrous, and the attached touchscreen-compatible index finger allowed for easy phone use. They also worked well with wet or dry hands, and the knit wrist prevented debris from entering the glove. We liked the fit, and the gloves are easy to clean. The gloves are more expensive than our top pick, the Ergodyne Multipurpose Work Gloves, but they offer superior grip and breathability. The Ergodyne gloves are more flexible and have better fingertip sensitivity, but they're also heavier and harder to clean.

The Vgo safety work gloves are a great choice for construction workers, mechanics, garden enthusiasts, and anyone who needs lightweight, dexterous gloves to protect their hands from abrasions and light-duty tasks. These gloves are comfortable to wear, and they offer good dexterity. The pre-curved fingers and 45-degree cut at the finger junctions make these gloves feel super comfortable, while the 5MM foam padding on the palm protects your hands from rough surfaces. The gloves are also super lightweight, so they're easy to put on and take off. The Vgo safety work gloves are definitely worth the cost.

Custom Leathercraft's 124M Workright Flex Grip Work Gloves are durable, comfortable, and well-made, and they offer a surprising amount of flexibility. If you're planning to do a lot of outdoor work, or if you plan to use the gloves in more demanding jobs, these gloves are worth considering. The outer shell is synthetic leather, which gives them some durability and protection from abrasion. The gloves also feature a stretchable spandex material in the palm, which improves their flexibility and dexterity, and that makes them more comfortable for your hands. The gloves have an elastic cuff with strap, which keeps them securely on your hand and prevents accidental drops. The gloves are also made with a rubber palm patch, which helps to improve grip. The gloves are general work gloves, so they're not made with any special materials that will make them perfect for every job, but they're a good choice for anyone whose work requires them to wear gloves or who simply wants a good pair of work gloves.

The Klein Tools 40082 Lineman Work Glove Large is an all-around work glove that works well for a variety of different jobs. It has reinforced leather patches on the palm and fingers, and it's made of soft grain leather. The soft grain leather construction makes the glove more durable, and the reinforced leather patches on the palm and fingers add durability. The gloves also come with knuckle guards, which are double-row padded for protection. The gloves are more flexible than leather gloves, and there's good ventilation in the palm and cuff. However, the gloves are a little big and bulky, so they're a little difficult to put on. The fit is a little snug, and there's not much room in the palm and fingers, so it's difficult for me to grip small items. The gloves are also a little stiff and tend to roll up around the wrist.

Work Gloves MicroFoam Nitrile Coated are nice gloves for general-purpose use. They offer a solid grip in oily conditions, with good abrasion resistance. The Micro Dots on the palms provide excellent grip, sensitivity and tactility, and the gloves have a soft feel. The gloves are affordable, too, and they fit comfortably, with a good fit in most hands. The gloves are an excellent choice for automotive work, home repair, and general assembly, and are also suitable for painting, home maintenance, horticulture, and other general-purpose work. For a larger pair, see our pick for the best neoprene work gloves.

The Superior Goatskin Leather Work Gloves (Endura-378GKTFG) are our favorite work gloves, and we've tested dozens over the years. They're comfortable, durable, and have an 8-hour workday rating of 5,675. They also passed the EN 388 puncture test, which means they protect your hands from sharp objects. The Goatskin leather feels soft, and these gloves are thin enough to wear under work gloves without overheating your hands. They are made in the USA of 100-percent goatskin leather, and they have Kevlar lining in the palm and index finger to help protect your hands from cuts. The palm of the gloves is 6.5 inches by 3 inches, and the gloves are 17 inches long. They fit large hands, and fit our 6-foot-2, 180-pound tester very well. The Superior Goatskin Leather Work Gloves (Endura-378GKTFG) are expensive, but we think they're worth it.