10 Best Gripper Panel Carriers
for September 2023

MOOZ Themes editors select recommendations independently, so your purchase through our link may earn us a commission.

A gripper panel carrier, also known as a gripper panel, is a piece of hardware that attaches to your vacuum cleaner's wand and lets you pick up small objects like buttons and coins. These handy gadgets are easy to install, and come in handy for cleaning up around the house or at the office.

In the MOOZ Themes Reviews Lab, we test gripper panel carriers for durability, ease of use, and how well they pick up small objects. We evaluate both suction and pick-up power, while our consumer testers evaluate how easy the gripper panel carriers are to install and remove, as well as how easy they are to clean. We scored the gripper panel carriers on ease of installation, removal, cleaning, and suction power. Here are the best gripper panel carriers of 2022:

1
9.9
SCORE
LOVIVER Set of 2 Heavy Metal Gripper Handle Lifting Carrier, Labor Saving Handling for Drywall, Plaster Boards, Wood Panels, Drywall Plywood Sheet

LOVIVER Set of 2 Heavy Gripper Metal Handle Lifting Carrier

by LOVIVER

The handle covered with soft rubber, non-slip. humanized design, comfort your hand.

The LOVIVER set of 2 heavy duty Gripper handles makes handling heavy loads a breeze. Made of durable, heavy-duty plastic, the Gripper handles are sturdy enough to support up to 600 lbs. They are comfortable to wear, and their flexible design makes it easy to grasp and maneuver heavy objects. The Gripper handles are lightweight, so you can carry them in one hand or lift them over your head. The handles also allow you to lift objects at an angle, so you can safely carry long loads over a balcony or into a room. The handles have a non-slip surface, so your hands won't slip off, and they have a rounded shape, so they won't hurt your knuckles. Sold in pairs, the Gripper handles are inexpensive enough to buy two, so you can move all of your heavy objects twice as fast.

2
9.5
SCORE
ZUOS Lift Plywood and Sheetrock Panel Carrier, 0 to 1 1/8

ZUOS Lift Plywood Sheetrock and Panel Carrier

by ZUOS TOOLS

This lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover.

ZUOS Lift Plywood and Sheetrock Panel Carrier is well-made, easy to use, and reasonably priced, making it a good choice for professionals and DIYers who want to lift sheets of plywood, plasterboard, and other types of sheetrock. This is the only tool we tested that offers this option, and it's a nice addition to this carrier's mix of other useful features, such as a handle that folds down for storage, a built-in ruler, and a ratcheting clamp. The handle folds down, so you can store the tool on a pegboard, or hang it from a hook on the wall. The handle also folds up, so you can use it as a lift handle, or lay it flat on the floor to use it as a stepladder. The ratcheting clamp can hold materials up to 1 inch thick, so it's a good choice for lifting sheets of plywood and other types of sheetrock. The clamp has a lever that folds down, so you can use it as a handle for carrying large sheets, or fold it back up for easy storage. The clamp's handle has grooves, so you can easily grip it with your hand when lifting. It wobbles a bit, but it's strong enough to hold plywood sheets without bending. The ruler is printed on the carrier, so it's easy to read, and the large handle makes it easy to hold. The handle has a rubber grip, so it's comfortable to hold, even for long periods. The carrier's handle is 30 inches long, so it's long enough to lift most sheets of plywood and other types of sheetrock. The carrier's clamp is 4 inches wide, so it's big enough to hold most plywood sheets. The carrier's clamp has a curved lip, so it's easier to grip, and the clamp's lever folds down, so it's easier to adjust the clamp. The clamp's lever folds up, so it's easier to store the clamp. The clamp's lever also folds down, so it's easier to adjust the clamp. The carrier's clamp has a rectangular opening, so it's easier, safer, and more comfortable to open than square openings. The carrier's clamp has a soft-touch surface, so it won't scratch your sheetrock. The carrier's clamp is 2.5 inches tall, so it's high enough to lift most plywood sheets. The carrier's clamp has holes, so it's easy to mount it to a tool stand. The carrier's clamp has built-in rubber feet, so the carrier won't slip and scratch your floor.

3
9.5
SCORE
Gypsum Board Carrier, Panel Gripper, 80Kg kid-proof Handle Lifting Boards Loader for Moving

Hoseten Gypsum Board Carrier

by Hoseten

TRP SOFT RUBBER SKID-PROOF HANDLE This gypsum board carrier with TRP soft rubber skid-proof handle provides comfortable feeling, There are strong grooved brace on both side,safe and labor-saving.

The Gypsum Board Carrier from KINGMAX is a well-made, sturdy, and durable tool, and it performs well in both lifting and carrying tasks. It has strong springs inside, so it's fairly heavy, and it only weighs about 8 pounds. It has a convenient handle and a removable carry strap, and the springs are also easy to remove and reattach. The handle is comfortable to hold, though it's a little short, and the carry strap is plenty long. The carry strap also has a convenient strap clip, so it's easy to attach and remove. It comes with two springs, one for regular lifting tasks and one for heavier lifting tasks. The springs worked well, lifting boards of about 5 pounds and up to about 80 pounds. The springs extend out, which makes it easy to grip the boards to lift them, and they also have hooks on the end, so they're easy to attach. The hooks also made it easier to attach the carry strap to the springs. The springs have hooks on the end, so it's easy to attach them to the board. The boards themselves were easy to attach, and they didn't slip much at all. The only complaint we had, and it's not a big deal, is that the springs might be a little too big for the carry strap. The springs could slip off the carry strap while it's on, and you could accidentally drop the board. This wasn't a problem for us, but it can be a little annoying.

4
9.3
SCORE
FivePears Panel and Plywood Carrier,Metal Gripper for Board,Drywall Carrying Tool (2 Pack) …

FivePears Panel and Plywood Carrier

by FIVEPEARS

Special feature: Grip handle for one-hand carrying, this panel/poly wood lifter features a durable , impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds and holds up to two sheets or panels. Get the job quickly with this convenient sheet and panel mover .

A sturdy, well-designed item, this clamp holds plywood, OSB, drywall, and other materials tightly in place, allowing you to carry heavy materials using a single hand. It's indispensable for contractors and carpenters, and it's inexpensive enough to buy an extra one if you're a contractor. The clamps are easy to set up and use, and they offer plenty of adjustment to hold materials tight. These are also the sturdiest, most stable drywall clamps we reviewed, and they hold materials tight enough that you won't have to use tools like the claw or claw hammer to lift heavy materials. They're also useful as carrying tools for other items, such as lumber, shingles, or pipe.

5
8.8
SCORE
Gorilla Gripper 44010 Panel Carrier

Gorilla Gripper 44010 Panel Carrier

by Gorilla Gripper

Makes it easy for one person to lift and carry sheet goods

The Gorilla Gripper 44010 Panel Carrier is a rugged, well thought out panel carrier that we found very comfortable to wear and carry. It's particularly useful for panels that are up to 6 ft long, which could easily be too long to carry by hand. The carrier has a padded shoulder strap and waist belt that adjust to fit different-sized users, and it's comfortable enough that it can be worn all day without feeling burdensome. The included locking lever allows you to lock the carrier in place during transit, so you won't have to worry about panels sliding around or falling off. The carrier is constructed from heavy-duty, reinforced nylon, and it's reinforced with metal hardware throughout. The locking lever and handle are made of aluminum, and the carrier has a steel zipper, all of which combine to make the carrier extremely sturdy. The carrier is lightweight but durable, and it has a maximum capacity of 660 lb. The carrier's dimensions vary depending on the panel size, but we found that it fit well on our 10 ft x 30 in. panel, and we even managed to carry 2 panels of 10 ft x 30 in. with it. The carrier's locking mechanism also snaps securely into place, so even if you're carrying more than 1 panel, it won't slip or slide around. We also found that it's ideal for transporting 2 panels at once, as it sits high enough off the ground that you won't have to worry about them falling over. The carrier's reinforced handles make carrying awkward panels much easier, and its overall rugged construction makes it a good choice for carrying panels on rough or muddy terrain. We also liked the carrier's adjustable shoulder strap and waist belt, which makes it easier to carry multiple panels at once. The carrier has a limited lifetime warranty, which we found reassuring.

6
8.8
SCORE
CSYHJRS Wood Board Lifter, High Performance Panel Carrier Tool, Easy Gripper Panel Carrier for Wood Board Plastic Sheet Metal

CSYHJRS Wood Board Lifter

by CSYHJRS

Widely used: Handling fixtures are very suitable for handling drywall and plywood. The most innovative tool for lifting and handling all kinds of plywood, panels, boards, etc.

The CSYHJR Wood Board Lifter is a solid choice for lifting panels up to 6 inches thick, and it's convenient and easy to use. It's simple to assemble and disassemble thanks to four screws, and the clip is sturdy enough to handle most of today's thicker material, including plastic and PVC panels. The clamp is adjustable and works with most panel thickness, and it's adjustable from 0 to 6 inches. The lifter is heavy, so it's best used for lifting only, and it's best used against a wall, not on the floor. For heavier work, we recommend the 36-inch version of the lifter.

7
8.8
SCORE
Amberbaby Wood Board Lifter, High Performance Panel Carrier Tool, Easy Gripper Panel Carrier for Wood Board Plastic Sheet Metal

Amberbaby Wood Board Lifter

by Amberbaby

Widely used: Handling fixtures are very suitable for handling drywall and plywood. The most innovative tool for lifting and handling all kinds of plywood, panels, boards, etc.

The Amberbaby Wood Board Lifter is a heavy duty panel carrier tool suitable for many different types of panels, including wood and glass board, plastic and sheet metal. The fiberglass-reinforced plastic arm is sturdy and durable, and the glass, gypsum, and plastic panels are surprisingly easy to use. The clamp adjusts automatically to accommodate the thickness of the panel or sheet, so it's very easy to use. The glass, gypsum, and plastic spreaders are much sturdier and easier to use than wood spreaders, and the toughened anti-skid pads on each of the spreaders protect the surface from scratches. The Amberbaby Wood Board Lifter is also sturdier and easier to use than our previous pick, the Smart Tools Panel Carrier, so it's a good pick if your work involves a lot of lifting.

8
8.7
SCORE
FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

FivePears Panel and Plywood Carrier

by FIVEPEARS

SELF-ADJUSTING GRIPPER CLAMP: This piece of equipment by Fivepears has a versatile, yet simple design that allows the clamp to grip onto a variety of different kinds of panels and sheet goods. As soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet. This innovative tool can hold up to two panels or sheets simultaneously.

The FivePears Panel and Plywood Carrier is a sturdy, well-made tool that makes carrying heavy sheets of material much easier. It features a sturdy, metal clamp and handle that hold plywood and drywall tightly, and the clamp adjusts to fit a wide range of thicknesses. The clamp is sturdy enough to hold plywood and drywall in place as you lift them, and the joint between the clamp and handle is reinforced with a steel bar. The glide handle provides easy one-handed carrying, and it's comfortable to hold, with a comfortable, concave grip. The gripper is self-adjusting, so it can grip securely onto a variety of sheet goods. The gripper is large and wide, so it's easy to use with two people, and it's long enough to accommodate sheets of plywood and drywall up to 20 feet long. FivePears backs the Panel and Plywood Carrier with a 1-year warranty.

9
8.5
SCORE
IMT Panel Carrier Heavy Duty, Drywall Hand Clamps Power Gripper, Plywood Sheetrock Handy Lifter for Wood/Board/Plastic/Sheet Metal, Self-Adjusting from 0-1 1/8

IMT Panel Carrier Heavy Duty

by IMT

Sales Now: Limited time offer!MAKES YOUR WORK A WHOLE LOT EASIER AND SAFER! Instead of two guys awkwardly hauling sheets, this panel carrier allows one person to do the job a whole lot easier! Ergonomic design, no need to bend over or twist body, simply place the clamp over the top and lift, reduces strain on back, neck, shoulders & arms.

The IMT Panel Carrier Heavy Duty is a heavy-duty drywall hand clamp, with a load capacity of up to 200 pounds. It can hold up to two sheets or panels at once, and the additional grip pads mounted on the clamp plates protect the sheet material from scratches. The clamp can lift up to 11/8", so it's ideal for heavy sheet materials such as drywall, plywood, metal sheets, melamine, large signs, glass panels, and other similar materials. The clamp is self-adjusting, so as soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet and tight as you lift. This gripper lifter is ideal for heavy sheet goods such as drywall, plywood, metal sheets, melamine, large signs, glass panels, and other similar materials. The special rubber gripping pads mounted on both plates protect the surfaces of the materials from being damaged or marred. The IMT Panel Carrier Heavy Duty is a sturdy, well-made hand crank clamp. It is durable and built to last.

10
8.4
SCORE
Plywood & Drywall Panel Carrier Gripper Handle, Single Hand Clamp Lift Tool for Wood/Glass/Plaster Board or Heavy Object without Handle, 0 to 1

LUBAN Plywood & Drywall Carrier Panel Gripper Handle

by LUBAN

Not only ideal for handing plywood panels, but also for drywall, metal sheets, glass panels, and materials that are awkwardly shaped or too long to carry or lift by just one person, a versatile panel carrier is an unique lifting and carrying tool perfect for the construction industry

This Panel Carrier works as advertised. It clamps down on any flat, solid surface (such as plywood, glass, and Formica), and holds the material tightly as you pick it up. The jaws are smooth and forgiving, so you won't have to worry about scratching or denting the material. It works well with sheets of plywood or drywall, but it's less ideal for materials like Formica, since it doesn't grip tightly enough. The handle is ergonomically designed to make carrying heavy panels easier. It comes with a short extension strap, so you can easily reach heights above your head. The Panel Carrier is also great for picking up heavy beams or objects without handles, like large washing machines or refrigerators. The handle is 9.5 inches long, so if you need a taller handle, an optional extension strap is available for $9.99.

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details