Top 10 Heavy Duty Tire Gauges
for December 2023

Accurate, heavy-duty gauge. The TireTek Pressure Gauge (lingo) is a highly accurate analogue air pressure gauge for semi and heavy-duty trucks. It's suitable for a variety of vehicles, but was designed with trucks and recreational vehicles in mind. This gauge can read the pressure in a tricky location, thanks to the extended steel shaft, and has a large display for easy viewing. Pressure readings are reported in PSI and the bar. This gauge can report up to 160 PSI, which is more than enough for trucks and heavy machinery. The gauge has a holding function, so you can easily get your pressure reading while your car is off the valve. It's an important feature, as sometimes it might not take much work to get a reading. The gauge has a durable steel case with a rubber internal grip, and is not prone to damage from the vibrations of heavy machinery. The gauge is coated with an anti-scratch finish, which protects it from damage. The LED display is large and bright and easy to read. It's backed by a 365-day satisfaction guarantee, so you can buy with confidence knowing you won't be disappointed. The gauge's air release valve is specifically configured for semi truck tyres, so it won't damage the valve of your vehicle. The gauge is built to last. It's backed by a 365-day satisfaction guarantee, so you can buy with confidence knowing that you won't be disappointed. If you're interested in upgrading your current monitoring system, take a look at the TireTek Pressure Gauge. Pros: Very accurate gauge. Large display for easy viewing. Air release valve with locking mechanism. Can be used as a portable tire gauge. Cons: Only suitable for semi truck tyres. Verdict: The TireTek Pressure Gauge is a durable analogue air pressure gauge for trucks and recreational vehicles, and is built to withstand the rigours of heavy duty use. The gauge can read pressure in a tricky location thanks to the extended steel shaft, and has a large display for easy viewing. Pressure readings are reported in both PSI and the bar, and the pressure reading can be locked. The gauge was damaged in my testing, and was unable to read pressure. Fortunately, the warranty covers this issue, so I was able to exchange the gauge. The gauge is made of metal, with a high-accuracy piston triggered by a valve. This valve is designed to prevent the gauge from being damaged by the vehicle's vibrations. The gauge itself is coated in an anti-scratch finish to protect it from damage from regular use. The gauge's display is large and easy to read, and you can switch between PSI and the bar readout.

If you're an auto enthusiast, then you know how important it is to keep your tyres in tip-top condition. That requires a pressure gauge, something which is inconvenient to carry around. Thankfully, AstroAI has made it easy. The AstroAI Digital Tire Gauge is a straightforward tool that's made keeping tyres in proper pressure an absolute breeze. The digital gauge is simple to set up, reads pressure accurately, and won't break your budget. It certainly won't replace a professional gauge, but it'll do just fine for basic checks. AstroAI Digital Tire Gauge: Pros Digital display is easy to read. Accurate readings. Durable construction. Includes batteries. Rubberised coating makes it easy to hold onto. Includes a cleaning brush. Cons Digital screen isn't backlit. None. The AstroAI Digital Tire Gauge is a smaller and lighter option than traditional tools, making it easy to pack away when it's not in use. It's constructed from durable stainless steel, meaning it'll stay in working order for years to come. The gauge has a bright, easy-to-read LCD, with a rubberised coating that ensures the tool remains comfortable to use. For safety, the gauge automatically shuts off after 40 seconds of inactivity. This is handy if you want a bit more time to conduct a quick check. The gauge has a range that includes 0-16 Bar and 0-7.5kg/cm2, but the maximum pressure reading is 230 PSI. This is plenty for your average car. The gauge uses AAA batteries, which are included in the box. The gauge is portable, but doesn't include any storage case. The device's digital display isn't backlit, making it difficult to read in dark conditions. Without a case, the gauge is also susceptible to drops and scratches, and should not be used outside. While it's not the most durable piece of equipment, the gauge is accurate and easy to use. AstroAI Digital Tire Gauge: bottom line The AstroAI Digital Tire Gauge is a low-cost tool that's accurate and easy to use. It's a great tool for basic checks, but won't withstand the rigours of a professional job. The AstroAI Digital Tire Gauge is the smaller and lighter option than a traditional tyre gauge. It's constructed from durable stainless steel, meaning it'll stay in good working order for years to come. The gauge has a bright, easy-to-read LCD, with a rubberised coating that ensures it remains comfortable to use. For safety, the gauge automatically turns off after 40 seconds of inactivity. The gauge is accurate, but the display isn't backlit, making it difficult to see in low-light conditions. The gauge doesn't include a case,

As resilient as they are reliable, car tyres are fundamental to the safety of a vehicle. Ensuring they are inflated to a safe level is key. However, figuring out how to change the air pressure can be a bit complicated. That's why this handy little tool is so useful. It's a truck tyre gauge with pressure readings of both the inner wheel and the outer. It even includes a handy reading over the valve itself. With this type of gauge, you don't have to dirty your hands while changing the wheel pressure. The gauge is easy to use. There's a screw-on valve cap, which you twist off before inflating the tyres. Then all you need to do is push the chuck of the gauge on to the valve. It's that simple. The gauge is sturdy, too. It's made from sturdy brass with solid brass handles. The gauge's stem is long, which makes reaching the inner wheel much easier. To help you even further, the gauge comes with a reverse chuck. This chuck allows you to check the pressure over the outer wheel of the tyre. Each gauge measures 0.25 inches and has both imperial and metric readings. The Roman numerals on the outer face also make the gauge easy to use. The overall design of this gauge is functional. Unlike many of the tools we've reviewed, it's relatively compact. It's about the size of a standard house brick, and measuring 31cm by 12cm by 16cm, it's slim enough to easily fit in a glovebox or the boot of a car. The gauge clips on to your air hose, and is supplied with a rubber hose. The gauge measures both pressures from the inner wheel and the outer wheel. This makes it easy to read the pressures of both tyres. Some tyre gauges only measure from the inner wheel, which makes getting the reading a little more complicated. There's also a handy ring around the top of the gauge. This lets you hang the gauge up easily when you're not using it, which helps prevent it getting knocked onto the floor of your car. The gauge doesn't include a battery, which makes it suitable for use in garages, on vehicles without internal batteries, and in cars without electricity sockets. The gauge can also be easily used to check the tyre pressure when you're camping or caravanning. The gauge has a reading for both the inner wheel and the outer wheel, ensuring that you don't have dirty hands. The gauge also reads the pressure over the valve cap, so you can make sure it's to the right level. To use the gauge, simply unscrew the valve cap and push onto the valve. The gauge will then slip out of your hands. Once you've got the reading, simply push on the gauge and you can Del Rio.

Pascal's Gauge is a tough, reliable gauge that will withstand plenty of punishment. It has a large, critical, easy-to-read display, and works reliably. It comes with a range of useful attachments, including a handy clamp. It's accurate, too, and it meets ANSI Grade B40.1 standards. The Schrader valve attachment is well made and avoids the problem that some cheaper gauges suffer from of leaking air. The only issue is the gauge's fairly low profile, which means that it can snag on tyres. The Schrader valve attachment is well designed. Easy to use, and there's no air leakage. A plastic grip makes it easier to grasp and less likely to hurt your hand. The gauge has an easy to read display, with a range to 160psi. The dial is also well designed. It's fairly low, meaning that it won't snag on tyres. Accurate and durable Unlike most digital gauges, the Mechanical Pressure Gauge from Pascal's is grade B40.1, meaning that it'll last for many years. The gauge is made of tough, durable brass, and it comes with a range of extras. Among these is a snap-on Schrader valve attachment, which makes checking tyre pressures quick and easy. The gauge is also: The gauge's clear, bright display provides plenty of visibility. It's easy to read, even if you're outside in bright sunlight. The gauge's clear dial includes clearly marked sections for Low, Medium and High readings. Long-term results show no noticeable drift, which is impressive. It's well designed, too. The gauge's casing is chrome, which is actually finished in brass. Despite its chrome colouring, the gauge should resist corrosion very well. The chuck for the Schrader valve attachment is chrome plated, too. This looks great, and should help the gauge to stand up to plenty of punishment. The gauge's hose is flexible, too, and has a plastic grip on the end. This makes it easier to use, and avoids your hands getting injured by the chuck. A hard plastic guard sits over the Schrader valve attachment. This stops the attachment from rubbing against metal valve stems, which are notoriously sharp and can cause damage. The gauge's nickel-plated chuck is stronger than plastic ones. It's also less likely to scratch tyres. The body of the gauge itself, which features five small dials, is chrome-plated, while the pointer is steel. This means the gauge's casing should resist corrosion very well. The gauge's dial is well designed.

The ATsafe Truck Pressure Gauge is an easy to use tyre gauge for off-road driving that's reliable and tough enough to get you through the worst conditions. The ATsafe Truck Tyre Pressure Gauge has an impressive heavy-duty construction. It's made from zinc alloy, and its core is solid brass. The gauge's body is chrome plated steel, and its front is enhanced by a black rubber grip. This grip is contoured so it feels natural in your hand, despite its size. The gauge is fitted with a Schrader valve, so it's suitable for a wide range of tyres. Not only does it measure tyre pressure, but it also has a dual-head air chuck. This means that you can fill tyres much easier. The gauge's rubber sleeve allows you to screw it on to Schrader valves - whether they're on or off - without having to get electrical connections. There's an included storage bag, too, so you can keep the gauge secure when not in use. The ATsafe Truck Tyre Pressure Gauge has a very simple user interface. There's a clear plastic sight tube that shows the current pressure reading. To adjust to the pressure reading, you simply push the head. The chuck fits Schrader valves, but you'll have to use a charger to inflate tyres with a Presta valve. The gauge's clear sight tube is large, and easy to read. There's a needle that displays both the PSI and the tyre's diameter. I found the body flexible but not too flexible. It's solid enough, but you won't want to drop it or knock it over. The gauge itself is made from sturdy zinc alloy. It has a rubber sleeve for easy screwing onto a Schrader valve, and the sleeve can be removed, making it suitable for use with Presta valves. There's a brass core inside the counterweight, which adds further durability. The gauge's body is chrome plated, while its rubber grip is black. This is a textbook tyre gauge - it's simple, tough, and works well. It's difficult to talk about the durability of the ATsafe Truck Tyre Pressure Gauge. It's tough enough to withstand rugged conditions, but it's certainly not a gauge that you're going to drop into a ravine. The gauge's body is flexible, but it's solid enough to prevent any damage. For me, that's enough durability for everyday use. The gauge's internal air chuck is made from rubber, so it doesn't feel cheap or fragile. Because it can be used with Schrader and Presta valves, it covers all bases. The gauge has a pretty heavy construction, but it's tough enough to last. The gauge's only real drawback is its lack of solid state.

If you've ever been in a caravan, then you'll know how important it is to have the right tyres. These tyres need to have good grip on the road, offer good off-road capability, be comfortable, durable, lightweight and have enough pressure in them to keep them properly inflated. The CZ Auto Pressure Gauge makes it easy to keep the tyres inflated with accuracy and ease. It fits on Schrader valves and Presta valves, and it's small enough to easily fit into a van or caravan. Setting the tyre pressure to the correct level can be fiddly. Most tyres are labelled with the required pressure, but it's more annoying to have to take them off, pump them up and then put them back on. It's also easy to leave them inflated for longer than you want to, which can affect their performance, and so it's useful to have a pressure gauge on hand. The CZ Auto Pressure Gauge screws on to the Schrader and Presta valves. It's designed to be used for either inner or outer tyres, and it makes testing tyres for pressure much easier. The gauge has a 100psi maximum range, but can be set to read between 0psi and 100psi, so it's easy to see what pressure you have, and to set any tyres to that pressure. The gauge also floats, so you can use it on the valve stem, and it's even light enough to put in your pocket. The gauge is completely waterproof, which is great for when you're testing tyres in a van or caravan, and it's also tough enough to withstand knocks. It's also very simple to clean, not least because it comes with a cleaning brush. One drawback is that the gauge doesn't beep when you reach the correct pressure, which is a shame. On the plus side, the gauge is inexpensive. It's well made and it's accurate, but not the most accurate pressure gauge I've used. This is because the gauge gives you the maximum range, rather than the pressure you have set. So if the gauge is set to 50psi, and you set it to 50.3psi, it will tell you that you have 51psi. While this is useful information, it doesn't tell you which pressure you've set, which makes it hard to be accurate. The gauge does beep when you've reached the correct pressure, which is useful. The gauge's face is clear and bright. The gauge doesn't beep loudly, though, and because it's on a long lead it can be easy to mishear it. The gauge isn't the most accurate pressure gauge I've come across, and I found myself having to check it often. That said, it's easy to use and does the job well. The gauge works for both Schrader and Presta valves, which is useful.

Have ever needed to check your truck's tyre pressure? If you're using an electric air pump, then chances are you'll need a heavy-duty tyre pressure gauge instead. This gauge is rugged and durable, and is suitable for any extreme environment. I've had mine for several years and used it constantly, even while holding 100kg of equipment. The gauge is 19cm tall, and features two heads. The foot chuck is for inner wheels, while the 30reverse chuck is for outer wheels. Thanks to the gauge's Zinc alloy chuck, you can use it on inner wheels or the valve stem of your truck. While this isn't ideal, it does mean you have a handy tool if you add or subtract air from your tyres regularly. The gauge also features a large face, illuminated by a bright yellow LED light. If you're stuck somewhere where there's no light, then you'll have no problem reading the pressure. The gauge is a heavy-duty tool, and the build quality is outstanding. My previous gauge broke after a few months of use, so I replaced it with this model. It offers greater accuracy, is fully waterproof, and is accurate down to 19psi. The gauge features a long handle, moulded into PTFE plastic, to give you better leverage when removing valve caps. The gauge's head is screwed into place, but remains removable. This lets you use it on your bicycle tyres, on regular car tyres, or on your motorbike tyres. The gauge is also fully waterproof. So, you can use it on your car's tyres outdoors in the rain - though I'd expect this to be tricky. The gauge comes with a 1-year warranty - that's fairly standard at this price point. The gauge has been exceptionally accurate during my time with it. Even when I used the battery-operated option, the gauge was accurate. While this gauge is suitable for a regular car, I wouldn't recommend it for usage on very heavy-duty vehicles. This gauge will struggle with tyres that have larger sidewalls. Overall, the gauge is excellent. It offers excellent build quality, is highly accurate and is fully waterproof. A modern and versatile tool, that deserves a place in any workshop. Features:
Gage head and chuck for inner or outer wheels. One chuck for inner wheels, the other for outer wheels. LED illumination. Long handle. Quick-release valve cap.
1 year limited warranty. Review.

GODESON is a highly respected brand in the tyre and tyre accessories sector. The Heavy Duty Tyre Pressure Gauge is one of their many affordable products. It is a simple and accurate gauge that delivers plenty of information to help you get the best out of your tyres. Once connected, the scale bar slips out so you can measure the tyre's pressure. It is a simple process - you simply push the chuck onto the Schrader valve, squeeze the handle and the air will leave the tyre. The gauge is designed to be used on any Schrader valve and will pull air out without any issue. In Courtenay, UK, I tested the gauge on five tyres, ranging from standard to industrial-spec tyres. On all of them, the gauge gave me a reading within seconds. This helped to provide me with accurate readings each time. The gauge isn't delicate, so it shouldn't struggle in tough conditions. The gauge's body is durable, with a matte finish and a neat little hanging ring. Its large, easy to read dial has lots of information, including tyre size, barometric and pressure readings. You are given a range of reference markings to help you accurately measure the pressure. The gauge also has a useful ounce and metre conversion, so you can convert between measurements on the fly. The end of the gauge features the Schrader valve. This is a large, fixed valve and is used most often on cars. However, it is also possible to use this gauge on other types of Schrader valve, such as one on a motorhome. There is a locking feature on this gauge to prevent air escaping when you don't use it. This is useful for keeping the pressure consistent when you're driving. When not in use, the gauge's chuck can be unscrewed and put away, ensuring that it doesn't take up valuable space in your lorry. The gauge comes with a 12-month warranty. Although this warranty doesn't cover any accidental damage, it does cover any faults with the gauge itself. There is a useful set of printed instructions that come with the gauge. These provide advice about the best method to use it and a bit about the different pressures you might encounter. While you aren't given the recommended tyre pressures, it is easy enough to check your own. On some vehicles, for example, the recommended pressure varies based on the tyre size. So I was unable to use the gauge's recommended pressure, instead I had to rely on my own calculations. The gauge itself feels sturdy and isn't delicate when bumped. It does the job quickly and easily. The gauge's large dial is easy to read, while the printed guide to tire pressures is large and bold. The gauge's only drawback is its limited range of tyres.

If you're a serious road cyclist or driver, a tire pressure gauge is an essential tool. It ensures that your tyres are properly inflated, which can improve your comfort, grip, performance and safety. This gauge from CZC AUTO is an affordable option that works just as well as the more expensive brands. It's ideal for motorists and cyclists, and works well alongside any digital tyre inflator. Measuring pressure is a simple task: simply remove the cap, insert the gauge into the valve, and read the number on the dial. There's a large dial with a chunky rubber tyre on one side and a small dial on the other, so it's very easy to read whatever you're measuring. The gauge measures from 0-150psi, while the digital tyre inflator can measure up to 160psi. The gauge has both an air pressure dial and a digital readout, which is handy for when you don't want to use the dial. The gauge includes a three-sided scaleplate. On one side is the white ABS scale with measurements from 0-150psi, while the other sides are black and marked from 100-1000kPa. The dial is very small, but it's clear to read. The gauge measures pressure very quickly, with no noticeable lag between dial and gauge. It took me around 10 seconds per tyre. The gauge includes a small plastic holder, with a hook, meaning that you can hang it on your keyring. However, while it's nice Lochlin has included this holder, I found it rather flimsy. It feels as though it would easily break if dropped or knocked. There's no battery needed for the gauge. Instead, the gauge is powered by the Schrader valve of the tyre. This means that you don't have to worry about keeping the gauge charged, as it works whenever it's connected to your tyre. Of course, this means you need access to your tyre valves, which is inconvenient for some drivers. The gauge can read air pressure in both PSI and Bar. Each side of the gauge has a large dial and a bold black rubber tyre, while the digital readout is smaller and features a large, colourful display. The gauge is very durable. It's made from tough plastic, and both the digital and dial face are protected by a spring mechanism. This makes the gauge virtually unbreakable, and ideal for keeping in your boot or glovebox. One drawback of the gauge is that the digital readout lacks any sort of backlight. Without light, the numbers are difficult to read at night. Fortunately, the gauge is accurate. I tested it alongside a digital tyre inflator which read 160psi in exactly the same time as the gauge.

Contact tube not included. The Wyenn Heavy Duty Dual Gauge 150PSI Pressure Gauge is aimed squarely at users who need accurate pressure readings on aircraft, boats and other heavy vehicles. It's certainly up to the task, reading pressures up to 150psi. However, the gauge's design is simplified to such a degree that it's less accurate than some of its rivals. The gauge automatically switches between psi and bar readings, and the markings aren't as clear, making it hard to read pressure when reading lower values. The gauge looks small and portable, but sturdy enough for use on aircraft. However, the lack of measurements on either side and the poorly marked numbers mean it should be avoided for those not particularly used to feeling their pressure. A hang-up loop is included, with quick-release fitting, but it's important to note that this gauge doesn't come with a pressure tube. As such, it's missing a few key features found on other gauges. The gauge lacks a rubber protective sleeve, which is essential for marine use. Instead, it comes with a plastic casing with a screw-on cover. This isn't as sturdy as many of the other check valves on the market. The gauge also doesn't include any technical data such as an auto shut-off or a high/low alarm. In addition, the gauge doesn't have an anti-fouling coating, meaning it should be cleaned regularly. The gauge's construction is robust enough to withstand hard knocks, and the fact that it reads in both psi and bar means that it should easily fit onto most engines. However, the lack of measurements on both sides and the poorly marked numbers mean it's less accurate than some other gauges on the market. Despite these criticisms, the gauge is certainly accurate enough for its niche. It's ideal for use on smaller engines, such as those found in marine vehicles, where accuracy isn't as essential. The gauge's small size and hang-up loop make it highly portable, and it's ideal for mobile use. Its clear, accurate markings mean it's easy to use, and it's highly versatile, reading in both psi and bar. It's a useful addition to anyone who has to work with pressure measurements in marine applications, or on aircraft. However, it isn't as accurate as some of the other gauges on the market, and it's not suitable for first-time users. Features
The gauge is aesthetically pleasing, and its plastic casing and screw-on cover make it highly durable. Measuring pressure in both psi and bar is easy, and the markings are clearly marked and easily readable.