OUMURS Adult Dirt Bike Helmet with Goggles Gloves & Mask Adjustable Sun Visor Adult Motorcycle ATV Helmet Off-Road Motocross Downhill Moped MX for Unisex-Adult-New Blue Flame
Double D Ring Design - OUMURS motorcycle helmet with double D ring design, easy to wear and wear firmly. It will not fall off even if it is impacted by external forces, effectively protecting your safety
The ORU Dirt Bike Helmet is an ideal choice for riders looking for a great-value helmet. It's packed with features, and its adjustable straps ensure a comfortable fit. There are a few drawbacks though. Firstly, the helmet's visor can be a bit of a hassle to clean. Secondly, the chin guard could do with being a bit more tightly attached to the helmet. Other than that, this helmet is a slimline option, giving you some protection without being overly bulky. It's lightweight, too, and its multi-directional retention system ensures it stays in place. The helmet's design allows plenty of airflow through the helmet, and features removable and washable cheek pads. These should keep you comfortable on warmer days. The helmet also comes with adjustable straps, so you can customise the fit. However, the chin guard does lift slightly at the sides, meaning you have to be careful when opening it - you don't want to open it up too far. The helmet features an integrated sun shield, which is easily accessible. However, the shield does require a small lock to be clicked into place, and it does have a tendency to slip out during ride. The helmet's visor is a Schott, and it can be adjusted to be either open or closed. It's a nice feature, although I did struggle to get the visor to open fully. It also has an integrated dust wiper, which pushes out dirt and small debris. The helmet meets DOT FMVSS-218 safety standards, and it's available in a range of colours. The helmet also comes in two sizes, so you can choose from either Adult-S or Adult-L. However, only one size is offered in Adult-XL, so make sure you check the size chart before buying. There's plenty of adjustment available on the helmet, thanks to a number of straps and buckles. The straps are easy to adjust, and lock securely in place. However, the buttons on the strap locks are quite small and fiddly to operate. The helmet's chin strap also uses these buttons, and they don't lock very securely in place. The helmet also features an RFM1 radio system, which allows you to communicate with other drivers. This is a nice feature, though it's unfortunate that the radio system is only available on helmets manufactured after 2015. The helmet also has a handy removable chin guard, so you can easily switch the helmet between a chin guard and a full-face helmet. The chin guard is secured by a durable click closure system, and is waterproof. The helmet has a few drawbacks, though. Firstly, the visor can be a bit of a hassle to clean, thanks to its external arrangement. Secondly,
XFMT DOT Youth Kids Motocross Offroad Street Dirt Bike Helmet Motorcycle Youth ATV Helmet with Goggles Gloves Blue Flame XL
FUN RIDES AND GIFTS - Various interesting and fashion patterns design makes this helmet funny and cool; Great for youth kids dirt bike, off-road, street riding, etc, absolutely a sweet birthday/Christmas gift for children
Dirtbike helmets are pretty much always associated with cool, masculine and intimidating characters. Style-wise, most helmets are dark, with no sign of colour or branding. As parents, we'd never looked at motocross helmets before - at least not with any sort of enthusiasm. But riding an off-road motorbike requires helmets and I wondered what benefit they'd be. Are they really any safer? And are kids more likely to wear them if they see something they want? After some research, I stumbled across the XFMT Youth Street Dirt Bike Helmet. Its striking appearance grabbed my attention, and the pricetag was an attractive bonus. At around £29.99, it's one of the cheapest motocross helmets on the market. Should you actually choose an off-road helmet for your child? The helmet is made up of a hard outer shell that is covered in thermoplastic resin. The helmet is finished with a glossy UV protective material, and there are five interesting designs available. I tested the eye-catching blue one. The front of the helmet is adorned with a large red, metallic in-moulded logo that wraps around the entire face. The helmet is topped off with a stylish, yet functional silver peak. For a child's helmet, the XFMT is impressively stylish. The glossy finish does a great job of keeping the helmet looking cool, and the red and silver graphics are immediately eye-catching. This helmet is available in three sizes: small (for kids aged 5-13), medium and large (for kids aged 14-19). The helmet is fitted with a security plate, which attaches underneath the chin strap. The plate is purely for cosmetic reasons, as it doesn't affect the helmet's safety in any way. Kids much fuss about wearing helmets, so it's important for them to see something that they like. The helmet's fit is conservative, with plenty of space for the head, and a suspension that can be adjusted to both length and height. The straps are secured with plastic buckles, which won't break if you yank them hard. The helmet also comes with a removable chin strap, ideal for a child whose helmet might hang down when they're not wearing it. The removable padding is washable, which is a big help. If you can't get the dirt out, at least you can rinse the padding. There's a small drain hole at the side with the opening pointing downwards, which helps water drain away. The padding is thick, so it can keep your head protected. However, it's bulky, making it uncomfortable to wear for longer periods. The outer shell is impressively strong and really resistant to impact.
SLMOTO Dot Youth & Kids Motocross Offroad Street Helmet Helmet Motorcycle Dirt Bike Motocross ATV Helmet+Goggles+Gloves Blue Flame Design
The motorcross helmet comes with goggles and gloves, it could provide all-around protection to you
While you might think of a motocross helmet as a pretty burly piece of kit, it's surprisingly light. After unboxing it, I wondered why I'd ever been convinced by my previous purchase of heavier helmets. The light Khairi Dirt Bike Helmet is fairly minimalistic. It's constructed from a durable polycarbonate shell that's covered with plastic panels, and the front is made from thick plastic too. This helmet's shell is reasonably strong, and it's well padded. The straps are one touch release, and a helmet bag is included with the helmet. The helmet's padding is thick and comfortable, with some great cutouts to keep your head and ears cool. My tester was small, and this suited me perfectly. However, this helmet isn't adjustable, so smaller children will need the help of a sibling. The helmet's chin strap is removable, and is light enough to carry while you ride. Although the helmet isn't adjustable, that's a good thing, as this helps keep the helmet's weight balanced better. The helmet's ventilation is excellent, with mesh all over the shell. This helps the helmet stay comfortable even when you're working hard, and makes the helmet look cool. The goggles feature a broad visor, which protects your eyes from dust and impacts. The goggles are adjustable and designed to fit a range of faces. They're a snug fit, but are easy enough to adjust. The helmet's side adjuster sliders work nicely too. The visor doesn't flip up, but there's a built-in sun visor that's easy to slide into place. There's also a handy lock when you don't want the visor to flap about. The goggles detach easily from the helmet, and they slot back in nicely. The padded chin strap Velcros together when you remove the helmet, but the straps themselves remain on the helmet. This means that you can carry them when you've taken the helmet off, which is a nice touch. The helmet's chin strap has a decent buckle, and its safety is enhanced by the two webbing straps that cross under the helmet's chin. These are adjustable too, and can be tightened to provide extra security. The helmet's breathable design does mean that it can get a little hot in direct sunlight, but this shouldn't be an issue unless you're riding for much longer than an hour. Helmet size. The helmet's padding is thick and comfortable, with some great cutouts to keep your head and ears cool. However, this helmet isn't adjustable, so smaller children will need to use some help from a sibling.
TCT-MOTORPARTS DOT Kids Youth Motocross Helmets ATV Off-Road Bike Dirt Motorcycle Full Face Blue Flame Helmet+Gloves+Goggles Medium
MULTIPLE AIR VENTS DESIGNKids/Youth ATV Helmet has multiple air vents around the helmet to maximize air circulation, make fresh air keep entering the helmet, You can have a good riding experience. The optimized vent reduces the wind noise and can ride more quietly.
Here at Quiet PC, we're big fans of the kids. We love seeing your little ones grow up, and there's nothing better than seeing their smiling faces as they get their first taste of independence. But we don't just love children; we also love action toys. Whether they're cars, boats or drones, if they make us sit up and take notice, we love them. And that's why we've become such big fans of the TCT-MOTORTS Youth Helmets. They're really well-built and tough, with a secure-fitting strap that comes fully adjustable for those with bigger heads. They're also very comfortable to wear, and come with goggles, as well as a tough bag. It's fair to say we've fallen a little in love. Here are our reasons. Sturdiness Helmet construction is important. Helmets are designed to protect heads in the event of falls and impacts, so they need to be robust and properly constructed. And these helmets certainly are. They've got plenty of padding, as well as strong shells. They're very well-made, which means that they're tough. The materials are also pretty durable, meaning that they'll last for seasons to come. Comfort You'll probably think that a child doesn't have the neck muscle that makes wearing a helmet uncomfortable. But you'd be wrong. Kids are surprisingly tough, and capable of wearing helmets for hours on end. These helmets have adjustable straps that can be adjusted to suit a wide range of head sizes, making them suitable for youngsters with any head size. And, thanks to their snug fit, they're not likely to give children a headache. the Goggles that come with this set are brilliant. They're well-protected, with a hard-shell construction that makes them tough. And, best of all, they're fully adjustable. That means you can dial them in to fit kids with smaller faces. The Safety of helmets for children is important. These helmets are compliant with the DOT (US) standard, meaning they're built to the smallest safety specifications. And there's plenty of protection inside to keep kids safe. The padded interior of these helmets provides an extra layer, meaning there's more protection for kids. It's a great option that kids will love, and one that's pretty affordable, too. The goggles that come with this helmet are brilliant. They're well-constructed, with a hard-shell construction that makes them tough, and given that they have fully adjustable straps, they're suitable for youngsters with smaller faces. They're also fast-releasing, which means you can quickly take them off when your child has finished playing with their ATV. They're definitely better than the average kid's goggles, which are normally pretty flimsy. They're safe to use, too, as they've passed the relevant safety testing.
Daytona Helmets "Leading The Way In Quality Headgear" Daytona Helmets Half Cap Skull Motorcycle Helmet – DOT Approved [Skull Flames Blue] [L]
1/2 shell biker helmet hugs head for a secure, snug fit that provides superior comfort
As you begin to pedal on a motorcycle, nothing feels more exhilarating than the wind whipping through your hair. However, when you fall over while riding, nothing feels less cool than asphalt! That's where a Daytona Half Helmet comes in. It's lightweight, DOT approved and made from sturdy materials. All of this helps to keep you comfortable, safe and above all, cool when riding at high speeds. The Daytona helmet also has a removable chin piece, so if you're really adventurous, you could ride your motorbike without a cap. The helmet is available in a variety of colours and finishes, allowing you to pick a helmet that suits your personal taste. The Daytona Half Helmet is DOT approved, which means it's been designed to meet the high safety standards of DOT. It's lightweight, has a great ventilation system and is comfortable to wear. With solid construction and a DOT-approved design, the Daytona Helmet offers great value for money. The Daytona Half Helmet is very light at 1lb 2oz, making it very comfortable to wear. The padding is soft, and the helmet is extremely breathable thanks to the large vents. The helmet has a moisture-wicking interior, which helps keep you cool even during the hot months of summer. This helmet is comfortable to wear for longer periods, and the Daetona Half Helmet easily passes the DOT standards. It offers good safety. There's a full face version of this helmet, perhaps if you want to ride with a more protective helmet - as you'll soon find out, the half helmet offers limited protection. The helmet has a solid construction, while the mesh grille and vents help to keep you cool. The security strap is very easy to use, and there's also a release system to make it easier to pull your helmet off. The chin strap is removable, which is handy if you fancy riding your motorbike without a cap. The Daytona Half Helmet is available in a variety of colours, finishes and sizes. I opted for the Matte Black finish, but there are also Dark Green, Orange, Red, Yellow, White and Silver options. The helmet is DOT approved, so you can be assured it's safe. Inside, there is a removable breathable fabric liner. This can be removed for washing, making this helmet extremely easy to clean. The helmet feels slightly bulky when new, but this quickly goes away. The helmet is comfortable to wear, and the padding doesn't cause pressure points. The helmet has a slightly wide neck, which helps to keep your head in place. The chin strap fastens securely, but there's a quick-release system that makes it simple to take the helmet off. The Daytona Half Helmet offers great value for money.
HIGH QUALITYOur helmet el light made of brand new high-quality materials, high brightness, cold light, no heat, no ultraviolet rays, and no electromagnetic radiation. The waterproof design of the motorcycle helmet lights prolongs its service life at room temperature. The upgraded 3M double-sided tape is more viscous and easy to clean after peeling.
The LED helmet light is a unique product that does a lot of things. It's a helmet light, a helmet light, and a helmet decoration. It switches between three flashing modes: steady, slow flashing, and quick flashing. It changes colour between red, green, blue, white, and black. It also works as a decoration on your helmet. The helmet light strip is rechargeable, so you can skip the disposable batteries. The helmet light itself was easy to set up. It's attached to a hard mount, which attaches securely to the helmet thanks to the lock. There are mounting points on the helmet light which allow it to be fixed to a visor, or close to your helmet chin. The LED helmet light isn't washable, but it does seem to be dust-proof. However, the helmet light strip does get quite hot during use, and it's very fragile. This is a product that does a lot, but its price is also quite high. The LED helmet light's three flashing modes are useful. The steady mode is for during the day. This illuminates your helmet so other road users can see your head. The light is subtle enough not to blind other road users, yet it still provides enough visibility to be seen. The slow mode is for when you're riding at night or in poor visibility. The helmet is well-lit, ensuring other road users will see you. Finally, the quick flashing mode is useful for passing other road users. The light is very bright and lasts long enough to be seen by other vehicles. As the helmet light automatically switches to the other modes when you stop riding, it's ideal for safety. The LED light does get quite hot. It's held on by a magnet, and that magnet does get quite hot. As a result, the helmet light does transfer a lot of heat to your head. This isn't a major problem, but it can get uncomfortable on your head if you're riding at night. The LED light isn't washable, but you do get a soft brush for cleaning your helmet. This Lily helmet light is easy to install. The helmet light has points which allow it to be fixed in place. Alternatively, you can remove the LED helmet light, and fix it to your bike. The light saves power by turning itself off when there's no motion going on. The light will also stop if you stop driving. The light is magnetic, but there's no lock to keep the light in place once it's attached. Overall, I really enjoyed using this helmet light. It does a lot, and it's easy to strap on and use. However, its price tag and battery life are issues that mean it's perhaps best left as a decoration when riding.
SLMOTO Dot Youth Kids Helmet Motocross Offroad Street Helmet Helmet Motorcycle Dirt Bike Motocross ATV Blue Flame Design Helmet+Goggles+Gloves
Lightweight & Comfortable - Upgraded lightweight ABS shell with a thick, high density fully vented EPS liner, ventilation opening system for air intake and exhaust, which brings you a better protection and comfortable wearing during riding
SLMOTO is a growing name in motorcycle helmets, and their youth helmets are a great all-round option. The DOT Youth helmet is a comfortable and durable option for off-road riders. It's not as flashy as some other helmets, but it comes packed with features. The helmet has a tough, durable shell that offers excellent protection and should withstand plenty of knocks. Meanwhile, ventilation for the helmet is excellent, and it comes with removable padding. The helmet's interior has soft liners that are comfortable and provide good heat insulation, while the two visors - a clear one and a darker one - are perfectly adjustable. In addition to all of this, the helmet has a scratch-resistant coating that makes it a great option for young riders who want to protect there helmets. The DOT Youth helmet has plenty of other features that will appeal to off-road enthusiasts. There are two visors included - one clear and one dark - and both clip onto the helmet's shell. The clear one is useful for riding in bright conditions, while the dark visor helps shield riders from the harsh rays of the sun. The helmet's ear flaps are very useful. They can be used to keep dirt out of the rider's ears when riding at low speed, but they can also be taken off when riding at high speeds. However, you should note that they don't offer much protection to the ears, and they aren't enough to cover them completely. The chin strap is adjustable, and the four-bolt chin buckle has a safety release mechanism. If you're worried about losing the helmet, this clever safety feature will certainly help. The DOT Youth helmet has two large air inlets that do a good job of keeping air moving through the helmet. However, these aren't as effective at keeping the rider cool as we'd like to see. The DOT Youth helmet packs in plenty of features to help riders get the best from their rides. The two visors included can be worn at the same time, or in pairs. If your young rider is older, they may prefer the more stylish dark visor, while if they like to be subtle, the clear visor will work just fine. The helmet's ear flaps can be removed when riding at high speeds, but they should only be taken off when riding at slower speeds. The helmet's ventilation is excellent - its two air intakes do a great job of keeping air moving through the helmet, and its vents at the back do a good job of keeping air cool. Adjustable padding does a good job of keeping the helmet comfortable. The one-piece internal padding is comfortable, and keeps the rider's head well cooled. The liners are also available separately. These liners look rather smart and are hardwearing.
SLMOTO DOT Youth & Kids Motocross Offroad Street Helmet Blue Motorcycle Flame Youth Helmet Dirt Bike Motocross ATV Helmet+Goggles+Gloves Medium
Professional Grade Motorcycle Helmet Meets or exceeds DOT FMVSS 218 standard. Exciting fashionable design with lots of advanced features. Exactly what you need for Street Bike, ATV, Dirt Bike, BMX and much more. For both boys and girls.
MOTOSPORT DOT Youth Street Motocross Helmet Blue Flame Helmet goggles, gloves, neck brace, arm protectors, knee pads and water bottle are provided. Tough ConstructionFour layers of protection - outer shell, impact-absorbing inner shell, EPS foam and a Falco felt liner. CPSC and CE CertifiedTested to meet CPSC and CE standards. Meets standards for ASTM, EN 1078 and ECE 22.05. Any child or teenager with an interest in off-road biking will definitely want a motocross helmet. However, there are different types of helmets - some may be better for some than others. For example, a helmet aimed at young riders might not offer as much protection as one aimed at experienced riders. The MOTOSPORT DOT Youth Street Motocross Helmet - Blue Flame Helmet is designed for beginner riders, offering excellent levels of protection. It conforms to CPSC and CE standards, while the foam liner is removable for easy cleaning. Comfortable Design The helmet is very durable. The outer shell is tough, while the EPS inner shell provides good impact absorption. The Falco liner feels soft to the touch. The helmet offers a wide range of adjustment points. Supplied with a set of double D-ring fastening straps, the helmet can be tightened easily. There's no risk of the neck strap slipping off either. There are also plenty of adjustment points for the straps and at the back. This makes it easy to fit a helmet to the head of any size and shape. The straps are close to the back of the head - this leaves enough room for long hair to hang around. The chin strap has an extra D-ring, which lets the rider fasten the helmet under his chin for more security. There's enough adjustment points from the straps and at the back, that more petite riders will be able to get a helmet that's the perfect snug fit. The helmet also accommodates riders with glasses or goggles. That said, not all goggles will fit well inside the helmet. Ventilation System Ventilation system is designed to keep air flowing through the helmet. It's effective - especially when the helmet is in full flow. However, the helmets is designed to keep water from leaking in. If it's raining heavily, you'll want to invest in a comprehensive waterproof pair of riding goggles. The helmet is well ventilated. There are adjustable intake vents at the front and exhaust vents at the back. This helps keep air flowing through the helmet. The flow of air is also assisted by the inner shell, which features channels that help to direct air through the shell. This directs air to the sides of the riders head, which helps to keep the rider cool.
TCMT Dot Youth & Kids Motocross Offroad Street Helmet Flame Blue Motorcycle Youth Helmet Dirt Bike Motocross ATV Helmet+Goggles+Gloves
Features: Beautiful Glossy UV Protective Finished; Light Weight Extremely Durable Composite ABS Shell; Multi Ventilation Openings, Good Ventilation; Adjustable Sun Visor; Comfortable/Removable/Washable/Breathable Liner; Strong and Sturdy Double D-ring Lock Keep the Helmet Stay on Firmer and Securer.
This helmet from TCMT is a great present for any child who is a passionate rider. Not only is it well built and durable, but it also offers decent levels of protection to keep your child safe. The helmet features multiple air vents, and sturdy vents on its chin guard. This keeps the air circulating and cool, even during prolonged rides. The helmet is well constructed, and it's reassuringly secure. It's also easy to adjust, thanks to the strong buckle and three adjustments points. The chin guard has considerable padding, keeping little faces protected. Available in five different sizes, there's also a drop-down visor for sun protection. The Youth Motocross Helmet from TCMT feels quite secure, and it's well made. It's impressively light, a feature that's beneficial to the youngest riders. It's covered in a variety of fancy patterns, and there's a clear central decal that looks great. It's also got goggles included, along with a pairing of gloves. The goggles are brightly coloured, and they're easy to adjust. The gloves are nice and secure, and there are thumb loops to help prevent the gloves from slipping off. The Youth Motocross Helmet from TCMT is very well put together. The padding is thick and durable, and the inner liner is removable and washable. The outer shell features plenty of durable plastic, and the visor is sturdy and well secured. The buckle is incredibly easy to adjust, and there are even three adjustment points to help secure the fit. The helmet feels nicely secure once it's buckled. As it's quite small, it takes up very little space, making it practical for transportation and storage. The rear slider locks open solid, and there's also a latch to keep the rear section secure. The chin guard is well padded, and it comes away from the face well. This lets the child wear goggles without a problem. The Youth Motocross Helmet from TCMT certainly offers value for money. It's a practical, well-made helmet that's comfortable and secure, and it's suitable for most riders. It's well-made, well made and reasonably priced. The goggles that come with the helmet are well-designed. They're secure, comfortable, and adjustable, making them suitable for most children. The gloves are also well designed. They're secure, fit well and are easy to put on. The overall quality of the Youth Motocross Helmet is reassuringly good, and it's clear that a lot of thought has gone into this helmet. The youth model weighs just 1,400g, which is far lighter than other helmets in the same price range. The helmet features a drop-down visor, which works well.
The Komet 6 Veloce Helmet is a well-constructed, lightweight helmet that's suitable for road cyclists who want a high-performance lid. The helmet is slim and low-profile, so it won't look out of place on anyone. The helmet's contoured shell is made from engineered thermoplastic alloy, a material that's strong but lightweight. You can adjust the chin strap with a single hand, and it features an integrated D-ring retention system. The helmet has 16 vents, which do a good job of keeping your head cool. The helmet's straps also have a significantly longer rear section, which helps keep straps from riding up off the back of your head, even if your cycling position is a bit aggressive. The rear strap is also constructed from an elastomer material that helps to stop sweat from soaking your body when riding in hot weather. In terms of fit, the helmet is a size medium. I found the straps were easy to fit and adjust, and the helmet was comfortable enough to wear during long rides. The helmet is contoured, so it sits slightly higher on your head than some other helmets. This means that it doesn't sit as low on the back of the head, but it also means it is less likely to move about. It adjusts vertically, too, so you can fine-tune the fit. The helmet is also equipped with two sets of retention points to prevent you from moving it around too much. These plastic points sit on the top and the back of the helmet. The inner lining of the helmet is well-stitched and securely fastened. The straps are chunky, so they're easy to grab hold of. The helmet isn't the lightest helmet I've ever worn, but it definitely isn't the heaviest. Being relatively slim, it didn't feel excessively bulky on my head. In addition to looking good, the helmet is also reasonably comfortable to wear. The low profile means that the helmet sits close to the head without trapping too much air. However, the helmet does feel tight, and I could see it moving about a bit slightly as I cycled along. The helmet has 16 vents, which provide good airflow at the chin. These are adjustable, so you can dial in more or less air-flow. The helmet also has ports for easily changing your hairstyle while you're in the saddle. The ports are reasonably large, so you shouldn't struggle to get your ponytail out. The helmet's straps are reasonably comfortable. The straps have a chunky plastic buckle that's easy to pull open and close, and the straps themselves are made from a mesh material. This material feels quite strong, and it won't ride up the back of your head when wearing a helmet.