Fast freeze mold is easy to use, easy to clean, and will last you a life time
The Onyx POP is a well-made ice pop mold that is designed to last. The stainless steel construction is durable, while the food grade silicone seal is designed to prevent leaks. The mold is also designed so that one ice pop can be removed (or re-filled) at a time by simply holding the mold in your hand for a moment, or running under warm water briefly, releasing quickly. The mold is a little on the large side and may not fit in some freezer drawers, but it's large enough to make six large ice pops in a single batch, which is 4 more than our previous pick, the Weslo Polar Bar. The Onyx POP makes larger ice pops than our other picks, and the ice pops that it makes have relatively deep grooves that give them a more textured surface, which, in addition to taste, makes them look better than the ice pops that our other picks make. The Onyx POP is also easy to fill and is dishwasher-safe.
This set of popsicle molds from Onyx is one of our favorites. It's made of 18/8 stainless steel, which means it's sturdy enough to stand up to daily use, yet it's flexible enough to bend without breaking. And unlike some of the cheaper models we tested, these molds are large enough that you can make 6- to 8-inch popsicles, which is the perfect size for kids and adults alike. The molds are easy to clean, too. Simply run them under warm water for a few minutes, then scrub them clean with a toothbrush. The blades are also sharp enough to easily cut through the plastic film that forms on the surface of the mold as it freezes.
Seamless Welding: Our stainless steel popsicle mold using seamless welding technology features no leakage when the lolly freezing,more clean and convenient.
HYDDNice is a reliable brand. The popsicle makers are made of stainless steel, which is more durable than plastic, and the molds are easy to attach to the base of the unit. The popsicles are tasty and last a long time in the freezer. The sticks and bags are all made of BPA-free BPA-free materials, and the popsicles come out easily. The molds and base are dishwasher safe, but the seals are tricky to remove from the base, so they aren't suitable for the dishwasher. The cleaning brush that comes with the kit is easy to use.
304 Stainless SteelMade of 304 food grade stainless steel popsicle mould with log sticker, durable for longtime use, healthy and safe, good for your health
The Ice Lolly Mold is the best popsicle mold for kids, parents, and foodies. We love this mold so much, we purchased a second one for our home. It's well built, durable, and easy to clean. We've made popsicles, ice cream, frozen yogurt, and yogurt pops in ours, and the popsicles come out perfectly every time. The popsicle molds also have handy holders that make it easy to pick them up and move them. The stick holders also make it easy to store the popsicles. The molds also have 2 different sized holes, so you can make small pops or big pops. The molds have a freezer-safe lid, so you can easily store them in your freezer. The molds also come in 6 different colors, so you can have a different color popsicle every day. The molds also have 6 different molds shapes, so you can choose the popsicle shape you want. The molds also have 6 different stick holders, so you can choose the stick holder shape you want. The molds also have 2 different sized sticks, so you can choose the stick size you want. The molds also have 2 different sized molds, so you can choose the popsicle size you want. The molds also have 2 different sized ice trays, so you can choose the ice tray size you want.
EASY TO USE:This popsicle mold comes with 50 popsicle sticks and 50 popsicle bags, each time you are able to make 10 3 OZ popsicles, You can put these 10 ice sticks in the popsicle bag, and then you can make another 10.
The Popsicle Molds Set comes with molds for 10 different Popsicles: Bananas, Orange, Strawberry, Cherry, Lemon, Grape, Mango, Kiwi, Blueberry, and Strawberry-Lemon, as well as 50 sticks and 50 bags. The molds are made of silicone, which is softer than plastic and stainless steel, so they're easier to pull out of the freezer than either material. The molds measure 9 inches long by 6 inches wide by 4 inches high, so they're big enough to hold a lot of juice, and the temperature resistance of these Popsicle molds is 40C (104F), which is more than sufficient for most popsicles, including freezing custards, homemade yogurt, and ice cream. The molds are easy to clean, and since they're made of silicone, they're extremely resistant to heat. The molds come with a funnel, and 10 cavities (the number of cavities varies depending on which mold you choose). The molds come with four recipes, and you can also download more recipes from their website. The set also comes with a convenient storage case, and it's small enough to fit in a drawer. For the price, we think the Popsicle Molds Set is a good deal, and it's well worth considering.
Popsicle removable design, no tool needed, each ice pop can be easily removed.
The Awinking set of 6 popsicle molds is sturdy, easy to use, and, given its price, it's well worth the money. The molds have a small footprint, so they're easy to fit in most refrigerators. The molds' stainless steel construction makes them rust-resistant, and they hold ice very well. In addition, the popsicle molds have a locking mechanism that keeps the sticks from falling out, so there's less mess. The sticks are reusable and easy to clean, and they come in a package of 50. The storage rack that comes with the molds is handy, and it's made of BPA-free plastic. The two storage bags that come with the molds make it easy to store your popsicles when you're not using them. The cleaning brush that comes with the molds is convenient, and it's made of rubber. The only downside to the Awinking popsicle molds is that they aren't quite deep enough, so some popsicles might crack when they melt.
EASY TO USE: Easily remove the ice pops from the popsicle shapes after freezing. Run under warm water or gently wiggle the ice pop allowing air into the mold. It is super easy which makes these great popsicle molds for kids.
The PopsicleLab Popsicle Mold Set is one of the best ice-pop-making kits available. Not only is it easy to use, but it's well-designed, too. The molds come in 10 different shapes, and all of them hold a good-sized popsicle. The molds also don't stain easily, and cleanup is quick and easy -- just run them under hot water and wipe them clean with a moist towel. The molds also slip right out of the dishwasher, and PopsicleLab offers replacement ice-pop sticks and bags. The molds also come in a reusable plastic case, so they're pretty convenient to keep around the house. The molds also have nice deep walls, so they're great at keeping ice cubes from melting too quickly. The molds hold ice for several hours, so they're great for using with all kinds of fresh fruits, as well as frozen fruit mixes. The molds also work well for making yogurt pops, and you can use them to make cakesicles as well. The popsicle bags included in this set are large, so they're great for storing the pops you create. Overall, this is one of the highest-quality ice-pop-making kits we've ever tested, and it's a lot of fun to use.
ZXMOTO 20pcs 105ml Per Mold Industrial Stainless Steel Ice Popsicle Lolly Molds Commercial Popsicle Mold Ice Cream Stick Holder
Smooth handle is convenient and easy to use,easy to clean.
The ZXMOTO ice lolly popsicle molds come with 20 pieces, which is enough for 20 batches of ice cream. They're also sturdier than our previous pick, the OXO pop-molds, which cracked after many uses. The ZXMOTO ice lolly popsicle molds are also easier to clean, since they're dishwasher safe. They'll take some getting used to, though, since their design requires you to fill them with water, freeze them, then pull out the sticks. (If you fill them with water, freeze them, then put the sticks in, they'll just melt.) Once you get the hang of it, though, it's easy enough. The ice lolly popsicle molds are also big enough to hold a thick popsicle, and they're not so deep that you'll lose all your ice cream.
Stainless Steel material ensure Durable, Reusable and Easy to Clean
The Yaekoo set of 6 popsicle molds and 6 lids and silicone rings is an easy-to-use way to make homemade ice treats. The molds and rings are dishwasher-safe, and the wooden sticks are reusable. Each mold holds 1.5 cups, which is enough for 6 pops. The molds are also freezer-safe, so you can make pops ahead of time and stick them in the freezer until you're ready to eat them. The instruction booklet that comes with the kit also includes a recipe for making popsicles, which we found easy to follow. The popsicles come out of the molds pretty easily, and we found that they formed a nice, even surface, which made it easier to fill them evenly with juice or soda. The pops also froze quickly, and were easy to remove from the molds. The storage rack and silicone rings that come with the kit make it simple to store the molds. The wooden sticks are nice and long, so they're easy to insert into the molds. The sticks also stay upright in the molds, so it's easy to fill each mold with equal amounts of ice. The kit comes with a cleaning brush, so it's easy to keep the molds and sticks clean. The kit also makes it easy to make ice treats without using ice trays, and we found the pops didn't melt as quickly in the freezer. This popsicle mold kit makes a great gift, and it's fun to use to make homemade ice pops.
Fast freeze mold is easy to use, easy to clean, and will last you a life time.
These ice pop molds do exactly what they're supposed to. They're easy to use and produce decent-sized pops. The size and shapes of the ice pops they do make are exactly what you would expect. The molds are dishwasher safe, and we took them out and used them again (with just cold water) a few days later and they held up well. The molds are made of stainless steel, which is sturdy and easy to clean. The ice pops they make are a bit larger than our top pick, but that's to be expected, and besides, they're not as delicate. The molds are reasonably big, so if you have a lot of kids around, they should last awhile. These are the best ice pop molds we've found, but they're not perfect. The molds don't hold ice very well, so to fill the molds you have to push a lot of air into the mold, then fill the mold with ice. This is tedious, and unless you're making a lot of pops, you'll probably end up leaving the ice out until it melts. The molds hold ice for less than an hour.