Top 10 Rail Mounts for Scopes for January 2021

Advertiser disclosure

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.8
SCORE
Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting.
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

BESTSIGHT Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting.

by bestsight outdoor
What We like

[Easy to Operate]Scope mount with two round buttons for easy detach.

more infoarrow_drop_down

Product Features

  • [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
  • Defect: Whether it is installed or disassembled, you need to remove 12 screws
  • [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
  • Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.

Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes. Defect: whether it is installed or disassembled, you need to remove 12 screws [suitable for high recoil]hold up under heavy recoil sustained fire in the most extreme shooting circumstances. [more stable]use of 6 screws in total is more stable and secure than 2 screws on standard mounts

2
9.7
SCORE
Ruger 10/22 Picatinny Rail Mount for Scopes and Optics
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Monstrum Ruger 10/22 Picatinny Rail Mount for Scopes and Optics

by Monstrum
What We like

Crafted from lightweight aluminum, 4.5 inches in length and 1.1 ounces in weight

more infoarrow_drop_down

Product Features

  • Picatinny rail mount for Ruger 10/22 model rifles
  • Installs via included set screws into the Ruger 10/22 factory mounting holes
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics

Installs via included set screws into the ruger 10/22 factory mounting holes Allows for the mounting of picatinny or weaver standard scopes, red dots, magnifiers, or other optics Picatinny rail mount for ruger 10/22 model rifles

3
9.4
SCORE
Higoo Low Profile Top Rail Picatinny/Weaver Scope Mount 11 Slots for Marlin Lever Action with Wrench
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Higoo Low Profile Top Rail Picatinny/Weaver Scope Mount 11 Slots for Marlin Lever Action with Wrench

by Higoo
What We like

Easy setup with all screws and an allen wrench provided.

more infoarrow_drop_down

Product Features

  • Material: Aluminum Alloy. Length: 4 3/4" (120mm). Width: 5/6" (20.8mm).
  • It is solid 11 slots picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions.
  • Holes align in straight line and have proper spacing for Marlin lever action.
  • The picatinny rail fits for Marlin 336, Marlin 30-30, marlin 1895 45-70, Marlin 1894, Marlin 30AS, Marlin 30AW, Marlin Camp 9, Marlin Camp 45, Marlin 1894C 357, Western Field 740, etc.

Material: aluminum alloy. length: 4 3/4" (120mm). width: 5/6" (20.8mm). The picatinny rail fits for marlin 336, marlin 30-30, marlin 1895 45-70, marlin 1894, marlin 30as, marlin 30aw, marlin camp 9, marlin camp 45, marlin 1894c 357, western field 740, etc. Holes align in straight line and have proper spacing for marlin lever action. It is solid 11 slots picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions.

4
9
SCORE
Modkin Rifle Scope Rings, Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Modkin Rifle Scope Rings

Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)

by Modkin
What We like

Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.

more infoarrow_drop_down

Product Features

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm).
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.

double scope ring mount for picatinny/ weaver rail (21mm). with 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily. built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. the ring is for most scopes which are in 1''/ 25.4mm scope tube. medium profile, 0.5'' gap from base of mount to bottom of ring. ( item height: 1.9'')

5
8.9
SCORE
LIRISY 1
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

LIRISY 1" Scope Mount Low Profile Scope Rings for 11mm Dovetail Rails (2 Pieces)

by ASIN
What We like

Pack in Lirisy Exclusive design packing box,make it different and special,good gift to your boy friend,father,grandfather.

more infoarrow_drop_down

Product Features

  • -- Scope rings are for standard riflescopes 25.4mm scope tube
  • -- Scope Rings Type: Medium Profile (14mm),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount
  • -- One of the rings has a stop pin the bottom of it for rock solid application
  • -- With four screws Design, it will hold the scope more securly than a single screw on both sides

-- one of the rings has a stop pin the bottom of it for rock solid application -- scope rings are for standard riflescopes 25.4mm scope tube -- with four screws design, it will hold the scope more securly than a single screw on both sides -- scope rings type: medium profile (14mm),fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount

6
8.6
SCORE
Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Modkin Scope Rings

Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

by Modkin
What We like

With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

more infoarrow_drop_down

Product Features

  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.71'' gap from base of mount to bottom of rings. ( Item height: 2'')
  • Double scope ring mount for Picatinny/ Weaver Rail (21mm).
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. Double scope ring mount for picatinny/ weaver rail (21mm). The ring is for most scopes which are in 1''/ 25.4mm scope tube. high profile, 0.71'' gap from base of mount to bottom of rings. ( item height: 2'')

7
7.9
SCORE
Monstrum Tactical 30 mm Rifle Scope Mounted Picatinny Rail Mount for Red Dot/Reflex Sights
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Monstrum Tactical 30 mm Rifle Scope Mounted Picatinny Rail Mount for Red Dot/Reflex Sights

by Monstrum Tactical
What We like

Crafted from sturdy, lightweight aluminum, the rail mount weighs 2 ounces and is 2 inches in length

more infoarrow_drop_down

Product Features

  • 30mm ring fastens around 30mm scope tubes, installing via two set screws and included hex key
  • The Picatinny rail mount will accept any standard Picatinny red dot/reflex sight or other optics
  • Attaches to 30mm rifle scope tubes, allowing you to mount a backup sighting system atop your rifle scope

The picatinny rail mount will accept any standard picatinny red dot/reflex sight or other optics 30mm ring fastens around 30mm scope tubes, installing via two set screws and included hex key Attaches to 30mm rifle scope tubes, allowing you to mount a backup sighting system atop your rifle scope

8
7.9
SCORE
MIZUGIWA 1inch /30mm Scope Adapter Ring/Mount with Picatinny/Weaver Top Rail for Backup/Second Laser
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

MIZUGIWA 1inch /30mm Scope Adapter Ring/Mount with Picatinny/Weaver Top Rail for Backup/Second Laser

by Mizugiwa (BJ) Co.,Ltd
What We like

See Through Design, Weighs 1 ounces

more infoarrow_drop_down

Product Features

  • Precision Machined Out of Premium 6061 Aircraft Aluminum
  • Single Weaver-style 1inch /30mm scope adapter
  • Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube rifle scopes.
  • 5 slots picatinny/weaver rail for backup/Second Laser, sight or light

Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube rifle scopes. 5 slots picatinny/weaver rail for backup/second laser, sight or light Single weaver-style 1inch /30mm scope adapter Precision machined out of premium 6061 aircraft aluminum

9
7.9
SCORE
EGW Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount - 0 MOA
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Evolution Gun Works EGW Remington 700, 721, 725 Long Action Picatinny Rail Scope Mount

0 MOA

by Evolution Gun Works
What We like

This mount comes standard with a bevel on both sides making it ambidextrous.

more infoarrow_drop_down

Product Features

  • The bolt pattern on Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x.
  • ITAR PRODUCT. By adding to cart, I confirm that I am U.S. Person, I agree that I do not intend to export this product, and I understand this product is regulated by the International Traffic in Arms Regulations (ITAR).

The bolt pattern on remington 700 long action mount fits long action remington 700 rifles (example 30-06, 300 win mag), as well as the 740 and 40x. Itar product. by adding to cart, i confirm that i am u.s. person, i agree that i do not intend to export this product, and i understand this product is regulated by the international traffic in arms regulations (itar).

10
7.7
SCORE
Higoo 1-Inch 1
design_servicesDESIGN
miscellaneous_servicesUTILITY
handymanUSABILITY

Higoo 1-Inch 1" Scope Ring Adaptor W/Picatinny/Weaver Rail

Tactical Barrel Clamp Mount with Rail for Scope Flashlight Laser Sight

by Higoo
What We like

Precision Machined Out of Premium 6061 Aircraft Aluminum

more infoarrow_drop_down

Product Features

  • 4 slots picatinny/weaver rail for scope/laser sight/flashlight
  • Lets you mount such accessories as red dot sight, laser, or flashlight
  • Single Weaver-style 1 inch scope adapter

Lets you mount such accessories as red dot sight, laser, or flashlight Single weaver-style 1 inch scope adapter 4 slots picatinny/weaver rail for scope/laser sight/flashlight

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details