10 Best Surehold Adhesives Fasteners
for June 2023

The Surehold SH-302 is an inexpensive, easy-to-use glue for gluing small items, such as paperclips and tacks. The formula is easy to work with, and it covers well, but the glue is not long-lasting (it bubbles and peels away after 24 hours). The 3-gram tube (the same size as the Surehold SH-300, which costs more and lasts longer) has about 6 months of shelf life once the product has been opened and used. This glue is long-lasting and works well for attaching lightweight items, such as paperclips and tacks, to paper. It's thin enough to apply to small items, but thick enough to hold fast. It's also easy to use: just squeeze the glue out, apply it, and wait for it to dry. The glue only comes in a tube, and there is no dispenser, so it's messy if you apply too much. The tube is also small enough to fit easily into a purse or pocket, so it's ideal for gluing small items that may not survive the mail.

The 2" ACCO Self-Adhesive Fasteners, 2" Capacity, Economy, 100 Fasteners/Box (70020), Silver (A7070020) is an inexpensive alternative to 3M's equivalent products. While the ACCOs aren't quite as strong as 3M's adhesive, we found that they're strong enough for most projects, and they don't leave behind any residue. The ACCOs' coined edges are smooth, so they don't damage your papers, and the prongs are long enough to fit most paper sizes. The fasteners are slightly thinner than 3M's equivalent, but we found that they fit more securely, and they don't require a lot of pressure to adhere. ACCO's adhesive is permanent, so it won't dry out and lose its hold. The fasteners come in a pack of 100, which is enough for a project or two.

The E-Z Pass mounting kit comes with 4 sets of 0.5" x 1.5" adhesive strips, enough to attach 1 E-Z Pass or I Pass or IZoom tag to your vehicle. The strips are easy to peel and place, and they seem to stick quite well to our test vehicles. They're also fairly thick, so they're not likely to come off if you drive over a bump or pothole. The kit also includes 4 mounting brackets, which fit the E-Z Pass or I Pass or IZoom tag perfectly. The mounting brackets need to be mounted to your vehicle's windshield; however, they don't require any tools to install, and they can be removed and re-used, so they're easy to remove if you decide to remove the tag later. The instructions were clear, and, as for the E-Z Pass or I Pass or IZoom tag, they worked fine and were easy to use. The E-Z Pass mounting kit yields decent results, but it's a little expensive. The strips are thin, which makes it easy to accidentally scratch the windshield, and the mounting brackets need to be mounted to the windshield, which can be a little inconvenient.

The Surehold SH-302 is a very simple, no-frills adhesive that is useful for a variety of applications, including joining two pieces of material, securing things together, and mounting hardware. The adhesive has a medium viscosity and dries quickly, so it's easy to use. Unlike other glues, it doesn't need a primer, which saves time. The adhesive comes in a tube, and it's easily stored. Its price is competitive, and we like that it doesn't require much work to use. The downsides are that it's fairly messy, as the glue tends to drip, and the glue isn't very strong. The Surehold SH-302 is a good choice for first-time users of adhesive, as it's easy to use and doesn't leave much residue.

The EZYKOO 465 Pcs Car Retainer Clips & Plastic Fasteners Kit is an impressive deal for the price, offering 19 popular push pin sizes (from 6mm to 10mm) and more than 100 different fastener types (including 5 Phillips and 5 flat head types). The kit is very comprehensive, covering not only the most common sizes, but quite a few sizes that are commonly needed for automotive applications, such as 5mm, 7mm, 8mm, 10mm, 10.5mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. The fasteners are made of plastic, so they're less durable than metal fasteners, but they're still very strong, and they won't rust or corrode. The fasteners are longer than they are wide, which makes them easy to insert in holes, and they provide a strong, secure fit. The package comes with a bonus Pry Tool to help you remove the fasteners. Overall, the EZYKOO 465 Pcs Car Retainer Clips & Plastic Fasteners Kit is a great tool to have on hand, whether you're working on your car, or you're working on other projects around the house.

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair is one of the strongest and most durable epoxy-based concrete repair products on the market. The paste sets in 30 minutes and cures fully in 24 hours. The two-part formula is mixed in the cartridge applicator, and both parts must be fully mixed before use. Once mixed, the paste remains fluid for 30 minutes, after which it begins to solidify. The paste is gray in color, and is extremely hard and resistant to abrasion. The paste is waterproof and is suitable for use in water and damp environments. The paste is flexible, and is suitable for repairing cracks in concrete, and for anchoring threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry. The paste is suitable for use with threaded rods that are 3/8 in. in diameter, and for threaded rods and bolts up to 1/4 in. in diameter. The paste is not recommended for use with metal rods or with dowels that are larger than 1/4 in. in diameter.

If you're looking for an easy way to dress up a Halloween decoration, or you just want to add some fun to your home decor, our black felt circles are just the thing. These felt circles come in a variety of sizes and shapes, and each one is 0.5 or 0.75 inches in diameter. They're best used to decorate walls, mirrors, picture frames, windows, and just about any other piece of flat surface you'd like to decorate. They come with self-adhesive backing, so they're easy to apply and can be removed at any time. The felt circles are soft and touch-friendly, so they don't leave any residue, and they adhere well to a surface. The circles also come in a variety of colors, so you can choose the color for your Halloween decorations that best fits your decor. At $4.99 per pack, these felt circles are a bargain, and the pack comes with enough circles to decorate a large room.

The Loctite Super Glue Plastics Bonding System is a high-quality, easy-to-use bonding kit, and it's much easier to use than more traditional epoxy kits. The parts are small and compact, so they're even easier to use than most of the kits we tested. A syringe of adhesive, a mixing tip, and a mixing stick are all that is needed, and mixing is easy. The glue bonds almost instantly, and the adhesive dries clear, so you can tell if it's dry. It's strong enough to be repaired and painted, and it won't crack or shrink. The 2-ounce cartridge of adhesive is also plenty big, so you won't be going through it quickly. The kit is inexpensive, too, and it comes with enough material for several projects. The only drawback is that the adhesive isn't as strong as the adhesives we tested in our other glue kits.

The J-B Weld 8265S is our original cold weld epoxy. It is a strong, hot-resistant, and waterproof epoxy that bonds a wide variety of materials together. J-B Weld Original has a tensile strength of 3960 PSI, a 99% cure rate, and a 2 hour set time. The epoxy is gray when mixed, and cures overnight to a black color. J-B Weld Original cures at 550 degrees Fahrenheit, and can withstand temperatures up to 550 degrees Fahrenheit. The epoxy is waterproof, and resistant to petroleum, chemical, and acid. J-B Weld Original is perfect for repairing or restoring metal, wood, plastic, tile, ceramic, concrete, and fiberglass. J-B Weld Original is versatile and reliable and is the world's leading family of strong, hot-resistant, and waterproof epoxy products.

Repairing plastic and composite parts is notoriously difficult, but J-B Weld's PlasticBonder can make the job much, much easier. It's especially useful for repairing fiberglass and carbon fiber composite parts, which can be difficult to repair because epoxy tends to leak out during the repair process. PlasticBonder's two-part formula makes it easy to mix, and it's quick to cure, so you won't have to wait hours for the glue to set. The epoxy is easy to sand, and the included mixing tray and stick make it simple to mix the two parts. Once mixed, PlasticBonder sets in about 15 minutes, and cures in 30 hours, so you'll have plenty of time to finish your project. PlasticBonder's tensile strength of 3770 PSI makes it stronger than other epoxy adhesives we tested, so you won't have to worry about your repaired parts cracking or breaking. The epoxy also cures to a hard, smooth finish, so you won't have to worry about uneven, bumpy surfaces.