Top 10 Temp Brand Printers
for May 2022

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.6
SCORE
Creality 3D Printer NTC Thermistor Temp Sensor 100K for Creality Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S (1m/39.4inch)

Comgrow Creality 3D Printer NTC Thermistor Temp Sensor 100K for Creality Ender 3

Ender 3 Pro, Ender 5, CR-10, CR-10S (1m, 39.4inch)

by Comgrow
What We like

Temperature sensor 100K accuracy of 1%

more infoarrow_drop_down

Product Features

  • Package include: 5 thermistors
  • It has 2 pins female connector
  • Use for heated bed or extruder
  • Wire length: 1m/39.4 inches

It has 2 pins female connector Wire length: 1m/39.4 inches Use for heated bed or extruder Package include: 5 thermistors

2
9.5
SCORE
HICTOP 100K ohm NTC 3950 100k thermistor 1.2m/Temp Sensor for Reprap Creality Ender 3, Ender 3 Pro, CR-10 10S 3D Printer 2Pin XH2.54 (Pack of 5)

HICTOP 100K ohm NTC 3950 100k thermistor 1.2m/Temp Sensor for Reprap Creality Ender 3

Ender 3 Pro, CR-10 10S 3D Printer 2Pin XH2.54 (Pack of 5)

by HIC Technology
What We like

Recommended parameters for the thermistor: R25=100K B25/50=3950K 1%

more infoarrow_drop_down

Product Features

  • There is a 2 pin female connector on the thermistor for 3D printer
  • Wire length for the thermistor: 1.2m/47.2 inches.
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc
  • HICTOP 3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers

Wire length for the thermistor: 1.2m/47.2 inches. There is a 2 pin female connector on the thermistor for 3d printer The thermisor is compatible with most 3d printers in the market such as ender3, ender3 pro, ender3 v2, cr-10, hictop d3 hero etc Hictop 3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers

3
9.5
SCORE
3D Printer 6x20MM 24V 60W High Temperature Heater Cartridge Element Compatible with V6 HOTEND PT100 Volcano MK8 Extruder CR-10 Ender 3 V2 CR10 3D Printer (24V 60W)

POLISI3D 3D Printer 6x20MM 24V 60W High Temperature Heater Cartridge Element Compatible with V6 HOTEND PT100 Volcano MK8 Extruder CR-10 Ender 3 V2 CR10 3D Printer (24V 60W)

by POLISI3D
What We like

This heater tube use high quality white cable and white sleeve, More durable and Better discrimination

more infoarrow_drop_down

Product Features

  • This heater has high quality, and uses closed stainless steel sleeve, much higher quality than the common heating tube on the market.
  • power: 24V 60W; cartridge size: OD6 x20mm, 1meter long cable
  • Package: 1piece high quality heater cartridge tube

Package: 1piece high quality heater cartridge tube This heater has high quality, and uses closed stainless steel sleeve, much higher quality than the common heating tube on the market. Power: 24v 60w; cartridge size: od6 x20mm, 1meter long cable

4
9.2
SCORE
3 Pack High Temp Tapes - Viaky 20mmx65.6ft Heat High Temperature Resistant Sublimation Tape, Polyimide Film Self Adhesive Tawny Tape for Electric Task, 3D Printers, Solder, Painting and Packing Fixing

Viaky 3 Pack High Temp Tapes

Viaky 20mmx65.6ft Heat High Temperature Resistant Sublimation Tape, Polyimide Film Self Adhesive Tawny Tape for Electric Task, 3D Printers, Solder, Painting and Packing Fixing

by viaky
What We like

Multi-UsesPerfect for all of your needs including masking circuit boards, soldering ,electrical insulation and splicing wires. It is also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry and more.

more infoarrow_drop_down

Product Features

  • Good QualityThis high temp tape made of polyimide, the surface of polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range.
  • High PerformanceThe high temp tape is superior resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion.
  • Package Include3 Pack high temp tapes in tawny color.Tape width 20mm(0.8in), length 20m(65.6ft).
  • Easy To UseExcellent performance of the heat resistant about 280C/536F.Strong self adhesive is easy to stick and no residue after peeling off.

Easy to useexcellent performance of the heat resistant about 280c/536f.strong self adhesive is easy to stick and no residue after peeling off. Good qualitythis high temp tape made of polyimide, the surface of polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range. Package include3 pack high temp tapes in tawny color.tape width 20mm(0.8in), length 20m(65.6ft). High performancethe high temp tape is superior resistant to uv, high temperature, acids, alkalis, oil, moisture and abrasion.

5
8.8
SCORE
Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

by LERWAY Tech.
What We like

Be more user friendly than the STC-1000

more infoarrow_drop_down

Product Features

  • Highly accurate and reliable temperature controller
  • Can control both heating and cooling output
  • Has an alarm to indicate sensor failure or high temperature
  • It does indeed read in deg F.

Has an alarm to indicate sensor failure or high temperature It does indeed read in deg f. Highly accurate and reliable temperature controller Can control both heating and cooling output

6
8.6
SCORE
FYSETC 3Pcs Upgrade HT-NTC100K Thermistor 3D Printer Parts Thermistor Sensor High Temperature +300 Degrees for CR10 Ender A8 Maker Pro Hot End Heater Block

FYSETC 3Pcs Upgrade HT-NTC100K Thermistor 3D Printer Parts Thermistor Sensor High Temperature +300 Degrees for CR10 Ender A8 Maker Pro Hot End Heater Block

by Fuyuansheng
What We like

HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.

more infoarrow_drop_down

Product Features

  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, The connector is 2pin XH2.54, so make sure your heater block is the right hole, the board Connection terminal is the right type, can be used with the heating block that support the thermocouple.
  • The temperature measurement: -50 C ~ +350 C, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament.

The temperature measurement: -50 c ~ +350 c, can replace the original k-type thermocouple temperature, very fit for printing high-temperature filament. Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. Upgrade ht-ntc100k thermistor: package temperature measurement. temperature measurement head cylinder diameter 3mm, length 15mm, the connector is 2pin xh2.54, so make sure your heater block is the right hole, the board connection terminal is the right type, can be used with the heating block that support the thermocouple.

7
7.7
SCORE
Kweiny Heat Insulation Cotton 10PCS and PTFE High Temp Tape for 3D Printer Makerbot Hotend

Kweiny Heat Insulation Cotton 10PCS and PTFE High Temp Tape for 3D Printer Makerbot Hotend

by xingzhu
What We like

Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE

more infoarrow_drop_down

Product Features

  • Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
  • High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 260 degrees Celsius (500 Fahrenheit )
  • Function: Keep heater block temperature constant, so that improving print quality, save electricity and prolong the service life of heater and temp sensor
  • Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.

Compatibility: matches all 3d print extruder heater block offered from e3d makerbot, mk8 makerbot reprap , etc. High temperature resistance: both ptfe tape and heat insulation cotton, short term resistance to temperature 300 degrees celsius (572 fahrenheit ), long term resistance to temperature 260 degrees celsius (500 fahrenheit ) Function: keep heater block temperature constant, so that improving print quality, save electricity and prolong the service life of heater and temp sensor Use-method: you can cut cotton into the right size and hole according to your needs, then stick it firmly with ptfe tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. you can also use ptfe tape to stick any other parts on your 3d printer

8
7.7
SCORE
HZD 3D Printer Heater Cartridge 1M Cable 24V 50W and Temp Sensor 1.2M Cable NTC 100K 3950 Thermistor for Ender 3 Ender 3 pro 3D Printing Extruder Parts 3PCS Each

HZD 3D Printer Heater Cartridge 1M Cable 24V 50W and Temp Sensor 1.2M Cable NTC 100K 3950 Thermistor for Ender 3 Ender 3 pro 3D Printing Extruder Parts 3PCS Each

by HZD
What We like

HZD will do effort to provide products which can meet most customers need, you can feel free to email or Q&A us if you have your own opinion.

more infoarrow_drop_down

Product Features

  • Package includes: 3pcs 24V 50W heaters (1M Cable) and 3pcs ntc 100k thermistors (1.2M Cable).
  • Compatible with Ender 3, Ender-3 Pro, Creality CR-10S Pro ect. MK8 MK9 24V Extruder Hotend etc.
  • From the ordinary 0.3-line high-temperature line to 0.5-line thick white line, upgraded Ceramic 24V 50W heater can bear temperature to 340-350.
  • Extended 1.2M long thermistors with XH2.54 female connector. It could meet more customers' need. Resistance value at 25C=100K.

Package includes: 3pcs 24v 50w heaters (1m cable) and 3pcs ntc 100k thermistors (1.2m cable). From the ordinary 0.3-line high-temperature line to 0.5-line thick white line, upgraded ceramic 24v 50w heater can bear temperature to 340-350. Extended 1.2m long thermistors with xh2.54 female connector. it could meet more customers' need. resistance value at 25c=100k. Compatible with ender 3, ender-3 pro, creality cr-10s pro ect. mk8 mk9 24v extruder hotend etc.

9
7.7
SCORE
10 Pieces 3D Printer 24V 50W Heater Cartridge 620 Heating Tube 1 m and 3D Printer Thermistor Temp Sensor NTC 100K Compatible with Ender 3, Ender 3 pro Extruder Accessories

Honoson 10 Pieces 3D Printer 24V 50W Heater Cartridge 620 Heating Tube 1 m and 3D Printer Thermistor Temp Sensor NTC 100K Compatible with Ender 3

Ender 3 pro Extruder Accessories

by Honoson
What We like

Feature: it is a negative temperature coefficient thermistor, with plug and 1 meter long high temperature cable insulated wiring; Temperature sensor 100K accuracy of 1% It has 2 pin female connector

more infoarrow_drop_down

Product Features

  • Cartridge heater specifics: voltage is 24v, power is 50w, conveniently pre-wired with 1 meter long high temperature cable insulated wiring, head diameter is 6mm/ 0.23inch, head length is 20 mm/ 0.78 inch
  • Package include: 5 pieces 24V 50W cartridge heater and 5 pieces NTC 100K temp sensor; The heater has longer service time because of the use of 304 stainless steel and the internal use of 2080 chrome wire
  • Wide application: compatible with Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro and most 3D printers, also suitable for MK8 MK9 MK10 Extruder/ Hotend etc.
  • Higher temp resistance: the white heater can bear higher temperature up to 340-350 degree; From the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful

Package include: 5 pieces 24v 50w cartridge heater and 5 pieces ntc 100k temp sensor; the heater has longer service time because of the use of 304 stainless steel and the internal use of 2080 chrome wire Cartridge heater specifics: voltage is 24v, power is 50w, conveniently pre-wired with 1 meter long high temperature cable insulated wiring, head diameter is 6mm/ 0.23inch, head length is 20 mm/ 0.78 inch Higher temp resistance: the white heater can bear higher temperature up to 340-350 degree; from the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful Wide application: compatible with creality cr-10s pro, cr-x, ender 3, ender 3x, ender-3 pro and most 3d printers, also suitable for mk8 mk9 mk10 extruder/ hotend etc.

10
7.3
SCORE
1piece 3D Printer 500℃ Thermistor T-D500 M3x15mm Cylindrical High Temperature Sensor 500℃ K500 Thermocouple Sensor Compatible with Volcano V6 Hotend PEI PEEK Nylon Carbon Fiber Printing

POLISI3D 1piece 3D Printer 500℃ Thermistor T-D500 M3x15mm Cylindrical High Temperature Sensor 500℃ K500 Thermocouple Sensor Compatible with Volcano V6 Hotend PEI PEEK Nylon Carbon Fiber Printing

by POLISI3D
What We like

Compatible with PT100 V6 hotend block, Prusa i3 printer and This Thermocouple sensor is 3mm x 15mm cylindrical package for compatibility with all cartridge-style heater blocks.

more infoarrow_drop_down

Product Features

  • Package: 1piece T-D500 Thermistor cartridge with about 1 meter long cable

Package: 1piece t-d500 thermistor cartridge with about 1 meter long cable

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details