Top 10 Watermelon Tapping Kits
for October 2023

The Final Touch Watermelon Keg Tapping Kit with Coring Tool is a fun way to serve drinks to a crowd. The watermelon keg is cheap, easy, and reusable, so you'll have fun drinking the same beverage over and over again. The tap is also inexpensive and easy to assemble, and an optional lid is included to keep drink spills to a minimum. Performance is also good, and we liked how the keg cleaned up easily after use. The kit comes with a watermelon, a coring tool, a tap, and a stand. The tap and coring tool are made of plastic, which is easy to clean. The stand is also made of plastic, and it's sturdy enough to hold the watermelon keg. The instructions are easy to follow, and the video instructions were helpful. The watermelon is pre-sliced and ready to go, but we found that it needed a little support when tapped, so we recommend leaving the lid off if you plan to serve drinks from the watermelon keg. The user manual also recommends using knives to cut the watermelon before use, but we found that this created more mess than the coring tool, so we recommend using the tool instead. The coring tool also works better if you plan to serve the watermelon keg with something other than fruit. The coring tool isn't very sharp, so it can be hard to puncture the watermelon, and the fruit inside the watermelon often came out with the watermelon. Still, the watermelon keg is fun and easy to use, and it's perfect for a party or special event.

We ordered this watermelon keg tap from FinalTouch, but Amazon doesn't carry it, so we found a third-party seller. The watermelon keg tap is about the size of a champagne bottle, and it has a hole in the top that lets you pour liquor. The tap itself has a plastic shank, but it securely screws onto a metal faucet, so it's sturdy. The tap screws onto the faucet, and it has a rubber stopper that seals the hole. The tap can connect to standard kegs, but we came up with a workaround (see the video). The tap also has its own 2-in-1 coring and scooping tool, which is easily detachable from the tap. The tool has a metal blade that carves out a hole in the center of the fruit, and it has a scooping tool on one end. The watermelon keg tap is easy to assemble, and it's a fun way to serve watermelon at your next summer barbecue.

The Stainless Steel Watermelon Keg Tap Kit is a sturdy, reliable, and easy-to-use tap kit that we tested, and it's the best kit we tested for producing a clear, steady stream of juice from watermelons. The kit comes with a sturdy stainless steel tap and an extra-long shank that accommodates watermelons with thick rinds, as well as pineapples and cantaloupes. The stainless steel tap has a 15mm inlet and 10mm outlet, and it's equipped with a dual O-ring system to prevent leaks. The tap's flow is also adjustable, so you can make more or less juice depending on the size melon you're serving. The kit also includes a plastic coring tool, which is necessary to remove the watermelon's rind. The coring tool is sturdy and works well, but it's not especially attractive or easy to use. The tap and coring tool both come with instructions for use, and both have clear markings.

This watermelon keg tapping kit is a great way to turn a watermelon, pumpkin, or pineapple into a wonderful drink-dispensing keg. The watermelon keg is made of plastic, and although it can be a bit difficult to pry open, the quality is decent. The dispensing spout is made of plastic as well, which is a little disappointing, but it's functional. The keg is lightweight, and the spigot is sturdy. The keg is reusable and easy to clean. The watermelon tap kit comes with two reusable yeast vials, a cleaning brush, and a bottle of cleaning liquid. The vials are simple and easy to use. The cleaning liquid removes residue and dirt from the keg. The keg and spigot are BPA-free. The watermelon tap kit also works great with other types of fruit, such as oranges and kiwi, so it's ideal for parties all year round.

The Watermelon Dispenser Tap Kit is a nifty, inexpensive way to turn any melon, pumpkin, or pineapple into an ice-cold drink. The kit works as advertised, and it's fun to use, too. The instructions have photos, so it's easy to find parts, and it comes with everything you need to get started. The tap itself is fairly small, so unless you have a very large melon, it won't be able to handle a whole one, but that's to be expected. The melon and coring tool also feel a little cheap, but that's to be expected from an inexpensive item. Overall, though, the Watermelon Dispenser Tap Kit works as promised, and it's a fun party accessory.

The Watermelon Tap Kit is a beer tap for watermelon, pumpkin, pineapple creation. All you need to do is insert the bottom end of a watermelon into the tap, then fill it up with water, ice, and your choice of beverage. The tap's spout is long enough that you'll probably be able to pour your whole drink without spilling. The kit also includes a drill bit, so you can easily drill a hole in the other end of your chosen fruit. We found the tap and drill bit to be pretty easy to use, and we liked that you can refill the tap with ice and ingredients without making a mess. The watermelon keg tap comes with enough parts to make four drinks, so it's handy to have on hand for parties. The spout is also long enough that it can be used as a pour spout for canned or bottled beverages, if you prefer. The watermelon spigot and pumpkin tap kit come packaged in an attractive, sturdy box, and the included screws and washers are a nice extra touch. The watermelon, pumpkin, pineapple tap kit is compact enough to fit in most any kitchen drawer, and the spout is long enough to stand upright on a countertop. This watermelon tap kit is a clever way to add a bit of fun to any party, and the included drill bit makes it ideal for outdoor parties.

The Party On Tap Pumpkin Tapping Kit comes with everything you need to serve your drinks in a real pumpkin. The kit includes two plastic taps, two paper straws, two plastic pumpkin cups, and straws for attaching to the bottom of the pumpkin. The cups and straws are reusable, so you can use them to serve different types of drinks such as wine or sangria, and paper straws are easy to dispose of. The kit also works as a pumpkin planter, so you can use it as a decoration for your Halloween party. The kit includes two taps, but it's only compatible with glass or stainless steel kegs, so keep that in mind if you're looking for a Halloween keg. The plastic taps are a little flimsy, and the included plastic cups are a little small, so we recommend upgrading the cups to larger ones. The kit also doesn't include any ice, so if you plan to serve drinks in the pumpkin, you'll have to use the keg's tap to add ice. That said, the Party On Tap kit is a great way to serve drinks in a real pumpkin at your Halloween party.

The Yueshico watermelon slicer is easier to use than any other watermelon slicer we've tried. Its automatic knife design allows you to cut the watermelon into cubes without a lot of effort. The watermelon slicer also has a built-in ruler, so you can measure your cubes as perfectly sized as you'd like. The edge design is also safer than conventional watermelon slicers, since our tool features a rounded edge. The Yueshico watermelon slicer also does a great job at cutting the watermelon into cubes, which we found to be much more consistent than other slicers we've tried. However, the Yueshico watermelon slicer does make quite a lot of noise, so it's best for use in a quiet kitchen or dining room.

The Maple Syrup Tree Tapping Kit from Sugar Shack Products is reliable and easy to use. Each kit includes 10 taps, 10 3-foot drop line tubes, 2 1-quart sap filters, and instructions. The sap filters are custom-sized for 1-quart mason jars, so you'll have more sap yield than with other filters. The tubes are 3 feet long, so they're long enough to reach most trees. The taps, which are compatible with most maple trees, are made of durable plastic and won't damage the tree. The kit also includes a 1-quart maple syrup filter, which is designed specifically for filtering sap. The filter is reusable, and it's made of food-grade tubing that can withstand high temperatures and harsh sap. The kit also includes recipe cards for homemade maple syrup, which is made from the sap you collect. The kit also comes with a 1-year warranty.

We like the Watermelon Melon Keg Tap because it offers a simple way to infuse watermelon juice into your favorite drinks. The 4-Piece Watermelon Tapping Kit included with this tap is handy, but it's also sold separately. The tap itself is easy to use, and it has a rubber grip that makes it easy to hold. The tap has a wide, wide opening, which makes it easy to fill. The tap is also easy to clean, because all you have to do to clean the tap is scrub it under running water. The tap also pours liquids slowly, so it has a gentler flow than some taps. The pump that comes with the tap is sturdy, and you don't have to hold it to dispense the liquid. The tap itself is sturdy and well-made, and the plastic handle is durable. The Watermelon Melon Keg Tap has a 4.5-star rating on Amazon, among 56 reviews, and it's currently discounted to $14.99 from $19.99.